REMOVAL
Removal / installation · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL |
 |
- NOTICE:
- Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
| 2.
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
|
 |
- Push the positions indicated by the arrows in the illustration inward to release the 2 stoppers.
- Pull the glove compartment door assembly in the direction indicated by the arrow shown in the illustration and detach the 2 hinges and remove it.
| 3.
REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
 |
Separate the clamp from the reinforcement.
- Disconnect the airbag connector.
- Remove the 2 bolts from the reinforcement.
- Separate the clip and clamp, and remove the instrument panel passenger airbag assembly.
| 4.
REMOVE INSTRUMENT PANEL WIRE NO.3 |
 |
- Disconnect the connector, and remove the instrument panel wire No.3 from the front passenger airbag assembly.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.