REMOVAL
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL |
 |
- CAUTION:
- Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
| 2.
REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1
|
 |
- Using a clip remover, remove the 2 clips
Detach the 3 claws and remove the instrument panel under cover sub-assembly No. 1.
| 3.
REMOVE AIR BAG SENSOR ASSEMBLY CENTER |
 |
- Disconnect the airbag connectors, as shown in the illustration.
Remove the 3 bolts and center airbag sensor.