2014-2019 Hiace · Service Manual BRAKE

DISASSEMBLY

Removal / installation · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY
  1. Mount the brake master cylinder sub-assembly in a vise.

    NOTICE:
    Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

  1. Using a pin punch and hammer, remove the pin from the brake master cylinder reservoir.

  1. Remove the brake master cylinder reservoir from the brake master cylinder sub-assembly.


2. REMOVE MASTER CYLINDER RESERVOIR GROMMET

  1. C318063
    Remove the 2 master cylinder reservoir grommets from the brake master cylinder sub-assembly.


3. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
  1. Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir sub-assembly.


4. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
  1. Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir sub-assembly.

← DISASSEMBLY (Oct 2014 – Dec 2014)REASSEMBLY (Oct 2014 – Dec 2014) →