INSTALLATION
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
| 1. INSTALL REAR SPEED SENSOR RH |
Install the rear speed sensor RH with the bolt.
- Torque:
- 8.5 N*m{ 87 kgf*cm , 75 in.*lbf }
- NOTICE:
- Prevent foreign matter from attaching to the sensor tip.
Install the 2 harness clamps with the 2 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Attach the 3 clips.
Connect the connector.
| 2. INSTALL REAR SPEED SENSOR LH |
Install the rear speed sensor LH with the bolt.
- Torque:
- 8.5 N*m{ 87 kgf*cm , 75 in.*lbf }
- NOTICE:
- Prevent foreign matter from attaching to the sensor tip.
Attach the 3 clips.
Connect the connector and attach the connector clamp.
| 3. INSTALL REAR WHEEL |
- Torque:
- 100 N*m{ 1020 kgf*cm , 74 ft.*lbf }
| 4. CHECK SPEED SENSOR SIGNAL |
- w/ VSC:
- (Click here)
- w/o VSC:
- (Click here)
