2014-2019 Hiace · Service Manual SUSPENSION & AXLE

ADJUSTMENT

Removal / installation · Vehicles built Dec 2015 – Mar 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017


1. INSPECT TIRES
(Click here)

2. MEASURE VEHICLE HEIGHT

  1. C112749E01
    Bounce the vehicle up and down at the corners to stabilize the suspension and inspect the vehicle height.

    Measuring points:
    A:
    Ground clearance of front No. 1 suspension adjust cam bolt head.
    B:
    Ground clearance of front center position of rear leaf spring front installation bolt head.

    NOTICE:
    1. Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
    2. The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.


    Vehicle height:
    Australia:
    Model
    A mm (in.)
    B mm (in.)
    TRH201R-RBMDKQ
    261 (10.28)
    272 (10.71)
    TRH201R-RBTDKQ
    260 (10.24)
    272 (10.71)
    TRH221R-MBMDKQ
    268 (10.55)
    273 (10.75)
    TRH221R-MBTDKQ
    267 (10.51)
    273 (10.75)
    TRH223R-LEMDKQ
    256 (10.08)
    264 (10.39)
    TRH223R-LETDKQ
    256 (10.08)
    264 (10.39)
    KDH201R-RBMDYQ
    256 (10.08)
    269 (10.59)
    KDH201R-RBPDYQ
    255 (10.04)
    269 (10.59)
    KDH201R-SSMDYQ
    252 (9.92)
    266 (10.47)
    KDH201R-SSPDYQ
    251 (9.88)
    266 (10.47)
    KDH221R-MBMDYQ
    263 (10.35)
    269 (10.59)
    KDH221R-MBPDYQ
    263 (10.35)
    268 (10.55)
    KDH223R-LEMDYQ
    254 (10.00)
    262 (10.31)
    KDH223R-LEPDYQ
    254 (10.00)
    262 (10.31)
    South Africa:
    Model
    A mm (in.)
    B mm (in.)
    TRH201R-RBMDKN
    265 (10.43)
    273 (10.75)
    TRH221R-MBMDKN
    272 (10.71)
    274 (10.79)
    TRH221R-MSMDKN
    268 (10.55)
    270 (10.63)
    TRH213R-JDMNKN
    257 (10.12)
    263 (10.35)
    TRH223R-LEMDKN
    262 (10.31)
    268 (10.55)
    TRH223R-LEMNKN
    258 (10.16)
    264 (10.39)
    KDH200R-RBMDYN
    262 (10.31)
    270 (10.63)
    KDH220R-MBMDYN
    268 (10.55)
    272 (10.71)
    KDH220R-MSMDYN
    264 (10.39)
    268 (10.55)
    KDH212R-JDMNYN
    256 (10.08)
    262 (10.31)
    KDH222R-LEMDYN
    262 (10.31)
    269 (10.59)
    KDH222R-LEMNYN
    257 (10.12)
    263 (10.35)
    New Zealand:
    Model
    A mm (in.)
    B mm (in.)
    TRH223R-LEMDKQ
    259 (10.20)
    266 (10.47)
    KDH201R-RBMDYQ
    256 (10.08)
    269 (10.59)
    KDH201R-RBPDYQ
    255 (10.04)
    269 (10.59)
    KDH201R-SSPDYQ
    251 (9.88)
    266 (10.47)
    KDH223R-LEMDYQ
    257 (10.12)
    265 (10.43)
    KDH223R-LEPDYQ
    257 (10.12)
    265 (10.43)
    TRH201R-SRMDK
    261 (10.28)
    269 (10.59)
    TRH201R-SRTDK
    261 (10.28)
    269 (10.59)
    KDH201R-SRMDY
    256 (10.08)
    267 (10.51)
    KDH201R-SRPDY
    256 (10.08)
    267 (10.51)
    KDH221R-MFMDY
    262 (10.31)
    267 (10.51)
    KDH221R-MFPDY
    262 (10.31)
    267 (10.51)
    Thailand:
    Model
    A mm (in.)
    B mm (in.)
    KDH201R-RBMDYT
    261 (10.28)
    272 (10.71)
    TRH213R-KDPNKT
    245 (9.65)
    271 (10.67)
    KDH213R-KDPNYT
    242 (9.53)
    269 (10.59)
    TRH223R-LEMDKT
    265 (10.43)
    275 (10.83)
    KDH203R-RDMNYT
    254 (10.00)
    268 (10.55)
    KDH223R-LEMDYT
    263 (10.35)
    273 (10.75)
    KDH223R-LEPDYT
    262 (10.31)
    272 (10.71)
    Singapore:
    Model
    A mm (in.)
    B mm (in.)
    KDH221R-MBMDYQ
    268 (10.55)
    270 (10.63)
    KDH221R-MBPDYQ
    267 (10.51)
    269 (10.59)
    KDH223R-LEPDYQ
    254 (10.00)
    262 (10.31)
    KDH201R-RBPDY
    260 (10.24)
    270 (10.63)
    KDH201R-SBMDY
    259 (10.20)
    269 (10.59)
    KDH203R-REMDY
    255 (10.04)
    268 (10.55)
    China:
    Model
    A mm (in.)
    B mm (in.)
    TRH223L-LEPNK
    257 (10.12)
    265 (10.43)
    TRH223L-LDPNK
    261 (10.28)
    267 (10.51)
    The Philippines:
    Model
    A mm (in.)
    B mm (in.)
    KDH203L-REMDY
    261 (10.28)
    269 (10.59)
    KDH213L-JDMNY
    262 (10.31)
    260 (10.24)
    KDH213L-JDPNY
    262 (10.31)
    259 (10.20)
    KDH213L-KDPNY
    243 (9.57)
    269 (10.59)
    KDH223L-LEPNY
    253 (9.96)
    256 (10.08)
    G.C.C. Countries (*1):
    Model
    A mm (in.)
    B mm (in.)
    TRH201L-SBMDKV
    265 (10.43)
    272 (10.71)
    TRH201L-SRMDKV
    262 (10.31)
    270 (10.63)
    TRH221L-MBMDKV
    273 (10.75)
    275 (10.83)
    TRH203L-REMDKV
    265 (10.43)
    271 (10.67)
    TRH203L-REPDKV
    265 (10.43)
    271 (10.67)
    TRH213L-JEMDKV
    265 (10.43)
    266 (10.47)
    TRH213L-JEPDKV
    264 (10.39)
    265 (10.43)
    TRH223L-LEMDKV
    265 (10.43)
    275 (10.83)
    TRH223L-LEMDKV
    (Rough Road Area Spec)
    268 (10.55)
    270 (10.63)
    TRH223L-LEPDKV
    265 (10.43)
    275 (10.83)
    TRH223L-LEPDKV
    (Rough Road Area Spec)
    267 (10.51)
    269 (10.59)
    TRH223L-LEMNKV
    264 (10.39)
    273 (10.75)
    TRH223L-LEPNKV
    264 (10.39)
    273 (10.75)
    KDH200L-SBMDYV
    260 (10.24)
    269 (10.59)
    KDH202L-REMDYV
    262 (10.31)
    270 (10.63)
    KDH212L-JEMDYV
    262 (10.31)
    265 (10.43)
    KDH222L-LEMDYV
    263 (10.35)
    274 (10.79)
    KDH222L-LEMDYV
    (Rough Road Area Spec)
    266 (10.47)
    269 (10.59)
    KDH222L-LEMNYV
    262 (10.31)
    273 (10.75)
    (*1):
    Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
    Russia:
    Model
    A mm (in.)
    B mm (in.)
    TRH223L-LEMNKX
    256 (10.08)
    264 (10.39)
    KDH223L-LEMNYX
    255 (10.04)
    262 (10.31)
    Hong Kong:
    Model
    A mm (in.)
    B mm (in.)
    TRH200R-SSTDK
    261 (10.28)
    269 (10.59)
    KDH201R-SSMDY
    256 (10.08)
    267 (10.51)
    KDH201R-SSPDY
    256 (10.08)
    267 (10.51)
    KDH201R-SSPNY
    254 (10.00)
    266 (10.47)
    Mexico:
    Model
    A mm (in.)
    B mm (in.)
    TRH221L-MBMDK
    273 (10.75)
    274 (10.79)
    TRH221L-LFMDK
    273 (10.75)
    275 (10.83)
    TRH223L-LEMNK
    262 (10.31)
    266 (10.47)
    Peru:
    Model
    A mm (in.)
    B mm (in.)
    KDH201L-SBMDY
    259 (10.20)
    269 (10.59)
    KDH203L-RDMDY
    261 (10.28)
    270 (10.63)
    KDH213L-JDMNY
    264 (10.39)
    271 (10.67)
    KDH223L-LEMDY
    265 (10.43)
    268 (10.55)
    Chile:
    Model
    A mm (in.)
    B mm (in.)
    KDH201L-SBMDY
    259 (10.20)
    268 (10.55)
    KDH203L-RDMDY
    261 (10.28)
    270 (10.63)
    KDH213L-JDMNY
    252 (9.92)
    261 (10.28)
    Tunisia:
    Model
    A mm (in.)
    B mm (in.)
    KDH202L-RDMDY
    255 (10.04)
    271 (10.67)
    Malaysia:
    Model
    A mm (in.)
    B mm (in.)
    KDH200R-RBMDYE
    262 (10.31)
    269 (10.59)
    TRH203R-EDMDKE
    264 (10.39)
    265 (10.43)
    KDH202R-EDMDYE
    262 (10.31)
    264 (10.39)
    Vietnam:
    Model
    A mm (in.)
    B mm (in.)
    TRH223L-LEMDK
    268 (10.55)
    270 (10.63)
    KDH222L-LEMDY
    265 (10.43)
    269 (10.59)
    Morocco:
    Model
    A mm (in.)
    B mm (in.)
    KDH201L-RBMDY
    260 (10.24)
    270 (10.63)
    KDH223L-LEMDY
    257 (10.12)
    263 (10.35)
    India:
    Model
    A mm (in.)
    B mm (in.)
    KDH223R-LDPNY
    258 (10.16)
    266 (10.47)
    Others:
    Model
    A mm (in.)
    B mm (in.)
    TRH201L-SBMDK
    265 (10.43)
    272 (10.71)
    TRH221L-MBMDK
    273 (10.75)
    274 (10.79)
    KDH200R-RBMDY
    260 (10.24)
    270 (10.63)
    KDH200R-SBMDY
    260 (10.24)
    270 (10.63)
    KDH200L-RBMDY
    261 (10.28)
    271 (10.67)
    KDH200L-SBMDY
    260 (10.24)
    269 (10.59)
    KDH220L-MBMDY
    268 (10.55)
    271 (10.67)
    LH200R-RBMDE
    262 (10.31)
    271 (10.67)
    LH200R-SBMDE
    261 (10.28)
    270 (10.63)
    LH200L-RBMDE
    262 (10.31)
    271 (10.67)
    TRH203R-REMDK
    266 (10.47)
    272 (10.71)
    TRH203L-REMDK
    265 (10.43)
    271 (10.67)
    TRH213R-JEMDK
    264 (10.39)
    266 (10.47)
    TRH213L-JEMDK
    264 (10.39)
    266 (10.47)
    TRH223L-LEMDK
    265 (10.43)
    275 (10.83)
    TRH223L-LEMDK
    (Rough Road Area Spec)
    267 (10.51)
    269 (10.59)
    TRH223R-LEMDK
    265 (10.43)
    275 (10.83)
    TRH223R-LEMDK
    (Rough Road Area Spec)
    267 (10.51)
    269 (10.59)
    TRH223L-LEMNK
    264 (10.39)
    273 (10.75)
    TRH223L-LEMNK
    (Rough Road Area Spec)
    266 (10.47)
    266 (10.47)
    KDH202R-REMDY
    262 (10.31)
    269 (10.59)
    KDH202L-REMDY
    262 (10.31)
    269 (10.59)
    KDH202L-RDMDY
    261 (10.28)
    271 (10.67)
    KDH212R-JEMDY
    262 (10.31)
    265 (10.43)
    KDH212L-JEMDY
    262 (10.31)
    265 (10.43)
    KDH222R-LEMDY
    263 (10.35)
    275 (10.83)
    KDH222R-LEMDY
    (Rough Road Area Spec)
    265 (10.43)
    269 (10.59)
    KDH222R-LEPNY
    262 (10.31)
    272 (10.71)
    KDH222R-LEPNY
    (Rough Road Area Spec)
    264 (10.39)
    266 (10.47)
    KDH222L-LEMDY
    263 (10.35)
    275 (10.83)
    KDH222L-LEMDY
    (Rough Road Area Spec)
    265 (10.43)
    269 (10.59)
    KDH222L-LEPNY
    262 (10.31)
    272 (10.71)
    KDH222L-LEPNY
    (Rough Road Area Spec)
    264 (10.39)
    266 (10.47)
    LH202R-REMDE
    262 (10.31)
    270 (10.63)
    LH202L-REMDE
    262 (10.31)
    270 (10.63)
    LH202L-RDMDE
    263 (10.35)
    272 (10.71)
    LH212R-JEMDE
    264 (10.39)
    265 (10.43)
    LH212L-JEMDE
    264 (10.39)
    265 (10.43)
    LH222R-LEMDE
    264 (10.39)
    275 (10.83)
    LH222R-LEMDE
    (Rough Road Area Spec)
    266 (10.47)
    269 (10.59)
    LH222L-LEMDE
    264 (10.39)
    275 (10.83)
    LH222L-LEMDE
    (Rough Road Area Spec)
    266 (10.47)
    269 (10.59)


3. INSPECT TOE-IN

  1. C107735E07
    Bounce the vehicle up and down at the corners to stabilize the suspension and inspect the vehicle height.

  1. Inspect the toe-in.

    Toe-in:

    A-B
    Toe-in
    (total)
    2.0 +/-2.0 mm (0.08 +/-0.08 in.)

    HINT:
    If the toe-in is not within the specified range, adjust it at the rack ends.


4. ADJUST TOE-IN
  1. Measure the thread lengths of the right and left rack ends.

    Standard:
    Difference in thread length of 3.0 mm (0.12 in.) or less

  1. Remove the rack boot set clips.

  1. Loosen the tie rod end lock nuts.

  1. Adjust the rack ends if the difference in thread length between the right and left rack ends is not within the specified range.

    1. Extend the longer rack end if the measured toe-in deviates toward the outer-side.

    2. Shorten the shorter rack end if the measured toe-in deviates toward the inner-side.

    3. Inspect the toe-in again.

  1. C112929E02
    Turn the right and left rack ends in opposite directions by an equal amount to adjust the toe-in.

    HINT:
    Try to adjust the toe-in to the center of the specified range.

    Standard:
    2.0 +/-1.0 mm (0.08 +/-0.04 in.)

  1. Tighten the tie rod end lock nuts.

    Torque:
    74 N*m{ 755 kgf*cm , 55 ft.*lbf }

    NOTICE:
    Temporarily tighten the lock nut while holding the hexagonal part of the steering rack end so that the lock nut and the steering rack end do not turn together.
    Hold the width across flat of the tie rod end and tighten the lock nut.

  1. Place the boots on the seats and install the clips.

    HINT:
    Make sure that the boots are not twisted.


5. INSPECT WHEEL ANGLE

  1. C132439E15
    Turn the steering wheel fully left and right and measure the turning angle.
    Text in Illustration 
    *a
    Inside
    *b
    Outside
    V100135
    Front

    NOTICE:
    1. Perform the inspection while the vehicle is empty.
    2. The maximum tolerance of right and left difference for the camber and caster is 30' (0.5°) or less.

    Wheel turning angle:
    Inside Wheel
    38°00' +1°30', -2°30'
    (38.00° +1.5°, -2.5°)
    Outside Wheel:
    Reference
    33°00' +1°30', -2°30'
    (33.00° +1.5°, -2.5°)

    If the right and left inside wheel angles differ from the specified range, check the right and left rack end lengths.


6. INSPECT CAMBER, CASTER AND STEERING AXIS INCLINATION

  1. C132440E30
    Put the front wheel on the center of the alignment tester.
    Text in Illustration 
    *a
    Alignment Tester
    *b
    Gauge

  1. Remove the center ornament.

  1. Install the camber-caster-steering axis inclination gauge at the center of the axle hub or drive shaft.

  1. Inspect the camber, caster and steering axis inclination.

    NOTICE:
    1. Perform the inspection while the vehicle is empty.
    2. The maximum tolerance of right and left difference for the camber and caster is 30' (0.5°) or less.

    Camber inclination:
    Except
    TRH213R-KDPNKT
    KDH213R-KDPNYT
    KDH213L-KDPNY
    -0°18' +/-45'
    (-0.3° +/-0.75°)
    TRH213R-KDPNKT
    KDH213R-KDPNYT
    KDH213L-KDPNY
    -0°24' +/-45'
    (-0.4° +/-0.75°)


    Caster inclination:
    Australia:
    Model
    Caster
    TRH201R-RBMDKQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH201R-RBTDKQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH221R-MBMDKQ
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH221R-MBTDKQ
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223R-LEMDKQ
    2°36' +/-45'
    (2.6° +/-0.75°)
    TRH223R-LETDKQ
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH201R-RBMDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH201R-RBPDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH201R-SSMDYQ
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-SSPDYQ
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH221R-MBMDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH221R-MBPDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH223R-LEMDYQ
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH223R-LEPDYQ
    2°36' +/-45'
    (2.6° +/-0.75°)
    South Africa:
    Model
    Caster
    TRH201R-RBMDKN
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH221R-MBMDKN
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH221R-MSMDKN
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH213R-JDMNKN
    2°36' +/-45'
    (2.6° +/-0.75°)
    TRH223R-LEMDKN
    2°30' +/-45'
    (2.5° +/-0.75°)
    TRH223R-LEMNKN
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH200R-RBMDYN
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH220R-MBMDYN
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH220R-MSMDYN
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH212R-JDMNYN
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH222R-LEMDYN
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH222R-LEMNYN
    2°36' +/-45'
    (2.6° +/-0.75°)
    New Zealand:
    Model
    Caster
    TRH223R-LEMDKQ
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-RBMDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH201R-RBPDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH201R-SSPDYQ
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH223R-LEMDYQ
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH223R-LEPDYQ
    2°30' +/-45'
    (2.5° +/-0.75°)
    TRH201R-SRMDK
    2°30' +/-45'
    (2.5° +/-0.75°)
    TRH201R-SRTDK
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-SRMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-SRPDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH221R-MFMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH221R-MFPDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    Thailand:
    Model
    Caster
    KDH201R-RBMDYT
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH213R-KDPNKT
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH213R-KDPNYT
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH223R-LEMDKT
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH203R-RDMNYT
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH223R-LEMDYT
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH223R-LEPDYT
    2°18' +/-45'
    (2.3° +/-0.75°)
    Singapore:
    Model
    Caster
    KDH221R-MBMDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH221R-MBPDYQ
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH223R-LEPDYQ
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH201R-RBPDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH201R-SBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH203R-REMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    China:
    Model
    Caster
    TRH223L-LEPNK
    2°36' +/-45'
    (2.6° +/-0.75°)
    TRH223L-LDPNK
    2°30' +/-45'
    (2.5° +/-0.75°)
    The Philippines:
    Model
    Caster
    KDH203L-REMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH213L-JDMNY
    2°42' +/-45'
    (2.7° +/-0.75°)
    KDH213L-JDPNY
    2°42' +/-45'
    (2.7° +/-0.75°)
    KDH213L-KDPNY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH223L-LEPNY
    2°48' +/-45'
    (2.8° +/-0.75°)
    G.C.C. Countries (*1):
    Model
    Caster
    TRH201L-SBMDKV
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH201L-SRMDKV
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH221L-MBMDKV
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH203L-REMDKV
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH203L-REPDKV
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH213L-JEMDKV
    2°36' +/-45'
    (2.6° +/-0.75°)
    TRH213L-JEPDKV
    2°36' +/-45'
    (2.6° +/-0.75°)
    TRH223L-LEMDKV
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223L-LEMDKV
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH223L-LEPDKV
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223L-LEPDKV
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH223L-LEMNKV
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223L-LEPNKV
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH200L-SBMDYV
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH202L-REMDYV
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH212L-JEMDYV
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH222L-LEMDYV
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH222L-LEMDYV
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH222L-LEMNYV
    2°18' +/-45'
    (2.3° +/-0.75°)
    (*1):
    Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
    Russia:
    Model
    Caster
    TRH223L-LEMNKX
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH223L-LEMNYX
    2°36' +/-45'
    (2.6° +/-0.75°)
    Hong Kong:
    Model
    Caster
    TRH200R-SSTDK
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-SSMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-SSPDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH201R-SSPNY
    2°30' +/-45'
    (2.5° +/-0.75°)
    Mexico:
    Model
    Caster
    TRH221L-MBMDK
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH221L-LFMDK
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223L-LEMNK
    2°30' +/-45'
    (2.5° +/-0.75°)
    Peru:
    Model
    Caster
    KDH201L-SBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH203L-RDMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH213L-JDMNY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH223L-LEMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    Chile:
    Model
    Caster
    KDH201L-SBMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH203L-RDMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH213L-JDMNY
    2°36' +/-45'
    (2.6° +/-0.75°)
    Tunisia:
    Model
    Caster
    KDH202L-RDMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    Malaysia:
    Model
    Caster
    KDH200R-RBMDYE
    2°30' +/-45'
    (2.5° +/-0.75°)
    TRH203R-EDMDKE
    2°36' +/-45'
    (2.6° +/-0.75°)
    KDH202R-EDMDYE
    2°36' +/-45'
    (2.6° +/-0.75°)
    Vietnam:
    Model
    Caster
    TRH223L-LEMDK
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH222L-LEMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    Morocco:
    Model
    Caster
    KDH201L-RBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH223L-LEMDY
    2°36' +/-45'
    (2.6° +/-0.75°)
    India:
    Model
    Caster
    KDH223R-LDPNY
    2°30' +/-45'
    (2.5° +/-0.75°)
    Others:
    Model
    Caster
    TRH201L-SBMDK
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH221L-MBMDK
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH200R-RBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH200R-SBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH200L-RBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH200L-SBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH220L-MBMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH200R-RBMDE
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH200R-SBMDE
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH200L-RBMDE
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH203R-REMDK
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH203L-REMDK
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH213R-JEMDK
    2°30' +/-45'
    (2.5° +/-0.75°)
    TRH213L-JEMDK
    2°30' +/-45'
    (2.5° +/-0.75°)
    TRH223R-LEMDK
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223R-LEMDK
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH223L-LEMDK
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223L-LEMDK
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    TRH223L-LEMNK
    2°18' +/-45'
    (2.3° +/-0.75°)
    TRH223L-LEMNK
    (Rough Road Area Spec)
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH202R-REMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH202L-REMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH202L-RDMDY
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH212R-JEMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH212L-JEMDY
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH222R-LEMDY
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH222R-LEMDY
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH222R-LEPNY
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH222R-LEPNY
    (Rough Road Area Spec)
    2°30' +/-45'
    (2.5° +/-0.75°)
    KDH222L-LEMDY
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH222L-LEMDY
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    KDH222L-LEPNY
    2°18' +/-45'
    (2.3° +/-0.75°)
    KDH222L-LEPNY
    (Rough Road Area Spec)
    2°30' +/-45'
    (2.5° +/-0.75°)
    LH202R-REMDE
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH202L-REMDE
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH202L-RDMDE
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH212R-JEMDE
    2°36' +/-45'
    (2.6° +/-0.75°)
    LH212L-JEMDE
    2°36' +/-45'
    (2.6° +/-0.75°)
    LH222R-LEMDE
    2°18' +/-45'
    (2.3° +/-0.75°)
    LH222R-LEMDE
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)
    LH222L-LEMDE
    2°18' +/-45'
    (2.3° +/-0.75°)
    LH222L-LEMDE
    (Rough Road Area Spec)
    2°24' +/-45'
    (2.4° +/-0.75°)

    Kingpin inclination:
    Except
    KDH213R-KDPNYT
    KDH213L-KDPNY
    12°36' +/-45'
    (12.6° +/-0.75°)
    KDH213R-KDPNYT
    KDH213L-KDPNY
    12°42' +/-45'
    (12.7° +/-0.75°)

  1. Remove the camber-caster-steering axis inclination gauge.

  1. Install the center ornament.
    If the caster and steering axis inclination are not within the specified values after the camber has been correctly adjusted, recheck the suspension parts for damage and/or wear.


7. ADJUST CAMBER

  1. C113828
    Loosen the nut on the front No. 2 suspension camber adjust cam.

  1. Turn the front No. 1 suspension camber adjust cam to adjust the camber.

    Camber inclination:
    Except
    TRH213R-KDPNKT
    KDH213R-KDPNYT
    KDH213L-KDPNY
    -0°18' +/-30'
    (-0.3° +/-0.5°)
    TRH213R-KDPNKT
    KDH213R-KDPNYT
    KDH213L-KDPNY
    -0°24' +/-30'
    (-0.4° +/-0.5°)

    NOTICE:
    1. Perform the inspection while the vehicle is empty.
    2. The maximum tolerance of right and left difference for the camber and caster is 30' (0.5°) or less.
    3. Be sure to inspect toe-in after the camber has been adjusted.

    HINT:
    If the camber adjust cam is turned 1 notch to the left when viewing from the front of the vehicle (the bolt moves approximately 1 mm to the outside), the camber will change by approximately -0°14' (-0.23°).

  1. Tighten the camber adjust cam nut.

    Torque:
    170 N*m{ 1730 kgf*cm , 125 ft.*lbf }


8. ADJUST CASTER

  1. C103215E03
    Loosen the lock nut on the strut bar (rear side).
    Text in Illustration 
    *a
    Front Side
    *b
    Rear Side

  1. Turn the adjust nut on the strut bar (front side) to adjust caster.

    NOTICE:
    1. Perform the inspection while the vehicle is empty.
    2. The maximum tolerance of right and left difference for the caster is 30' (0.5°) or less.
    3. Be sure to inspect toe-in after the caster has been adjusted.

    HINT:
    If the adjust nut of the strut bar (front side) is moved approximately 1 mm (0.04 in.), the caster will change by approximately 0°08' (0.13°).


    Caster inclination:
    Australia:
    Model
    Caster
    TRH201R-RBMDKQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH201R-RBTDKQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH221R-MBMDKQ
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH221R-MBTDKQ
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223R-LEMDKQ
    2°36' +/-30'
    (2.6° +/-0.50°)
    TRH223R-LETDKQ
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH201R-RBMDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH201R-RBPDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH201R-SSMDYQ
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-SSPDYQ
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH221R-MBMDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH221R-MBPDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH223R-LEMDYQ
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH223R-LEPDYQ
    2°36' +/-30'
    (2.6° +/-0.50°)
    South Africa:
    Model
    Caster
    TRH201R-RBMDKN
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH221R-MBMDKN
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH221R-MSMDKN
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH213R-JDMNKN
    2°36' +/-30'
    (2.6° +/-0.50°)
    TRH223R-LEMDKN
    2°30' +/-30'
    (2.5° +/-0.50°)
    TRH223R-LEMNKN
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH200R-RBMDYN
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH220R-MBMDYN
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH220R-MSMDYN
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH212R-JDMNYN
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH222R-LEMDYN
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH222R-LEMNYN
    2°36' +/-30'
    (2.6° +/-0.50°)
    New Zealand:
    Model
    Caster
    TRH223R-LEMDKQ
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-RBMDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH201R-RBPDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH201R-SSPDYQ
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH223R-LEMDYQ
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH223R-LEPDYQ
    2°30' +/-30'
    (2.5° +/-0.50°)
    TRH201R-SRMDK
    2°30' +/-30'
    (2.5° +/-0.50°)
    TRH201R-SRTDK
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-SRMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-SRPDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH221R-MFMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH221R-MFPDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    Thailand:
    Model
    Caster
    KDH201R-RBMDYT
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH213R-KDPNKT
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH213R-KDPNYT
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH223R-LEMDKT
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH203R-RDMNYT
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH223R-LEMDYT
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH223R-LEPDYT
    2°18' +/-30'
    (2.3° +/-0.50°)
    Singapore:
    Model
    Caster
    KDH221R-MBMDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH221R-MBPDYQ
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH223R-LEPDYQ
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH201R-RBPDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH201R-SBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH203R-REMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    China:
    Model
    Caster
    TRH223L-LEPNK
    2°36' +/-30'
    (2.6° +/-0.50°)
    TRH223L-LDPNK
    2°30' +/-30'
    (2.5° +/-0.50°)
    The Philippines:
    Model
    Caster
    KDH203L-REMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH213L-JDMNY
    2°42' +/-30'
    (2.7° +/-0.50°)
    KDH213L-JDPNY
    2°42' +/-30'
    (2.7° +/-0.50°)
    KDH213L-KDPNY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH223L-LEPNY
    2°48' +/-30'
    (2.8° +/-0.50°)
    G.C.C. Countries (*1):
    Model
    Caster
    TRH201L-SBMDKV
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH201L-SRMDKV
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH221L-MBMDKV
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH203L-REMDKV
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH203L-REPDKV
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH213L-JEMDKV
    2°36' +/-30'
    (2.6° +/-0.50°)
    TRH213L-JEPDKV
    2°36' +/-30'
    (2.6° +/-0.50°)
    TRH223L-LEMDKV
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223L-LEMDKV
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH223L-LEPDKV
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223L-LEPDKV
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH223L-LEMNKV
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223L-LEPNKV
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH200L-SBMDYV
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH202L-REMDYV
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH212L-JEMDYV
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH222L-LEMDYV
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH222L-LEMDYV
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH222L-LEMNYV
    2°18' +/-30'
    (2.3° +/-0.50°)
    (*1):
    Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and Kuwait
    Russia:
    Model
    Caster
    TRH223L-LEMNKX
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH223L-LEMNYX
    2°36' +/-30'
    (2.6° +/-0.50°)
    Hong Kong:
    Model
    Caster
    TRH200R-SSTDK
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-SSMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-SSPDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH201R-SSPNY
    2°30' +/-30'
    (2.5° +/-0.50°)
    Mexico:
    Model
    Caster
    TRH221L-MBMDK
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH221L-LFMDK
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223L-LEMNK
    2°30' +/-30'
    (2.5° +/-0.50°)
    Peru:
    Model
    Caster
    KDH201L-SBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH203L-RDMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH213L-JDMNY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH223L-LEMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    Chile:
    Model
    Caster
    KDH201L-SBMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH203L-RDMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH213L-JDMNY
    2°36' +/-30'
    (2.6° +/-0.50°)
    Tunisia:
    Model
    Caster
    KDH202L-RDMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    Malaysia:
    Model
    Caster
    KDH200R-RBMDYE
    2°30' +/-30'
    (2.5° +/-0.50°)
    TRH203R-EDMDKE
    2°36' +/-30'
    (2.6° +/-0.50°)
    KDH202R-EDMDYE
    2°36' +/-30'
    (2.6° +/-0.50°)
    Vietnam:
    Model
    Caster
    TRH223L-LEMDK
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH222L-LEMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    Morocco:
    Model
    Caster
    KDH201L-RBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH223L-LEMDY
    2°36' +/-30'
    (2.6° +/-0.50°)
    India:
    Model
    Caster
    KDH223R-LDPNY
    2°30' +/-30'
    (2.5° +/-0.50°)
    Others:
    Model
    Caster
    TRH201L-SBMDK
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH221L-MBMDK
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH200R-RBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH200R-SBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH200L-RBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH200L-SBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH220L-MBMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH200R-RBMDE
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH200R-SBMDE
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH200L-RBMDE
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH203R-REMDK
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH203L-REMDK
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH213R-JEMDK
    2°30' +/-30'
    (2.5° +/-0.50°)
    TRH213L-JEMDK
    2°30' +/-30'
    (2.5° +/-0.50°)
    TRH223R-LEMDK
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223R-LEMDK
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH223L-LEMDK
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223L-LEMDK
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    TRH223L-LEMNK
    2°18' +/-30'
    (2.3° +/-0.50°)
    TRH223L-LEMNK
    (Rough Road Area Spec)
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH202R-REMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH202L-REMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH202L-RDMDY
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH212R-JEMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH212L-JEMDY
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH222R-LEMDY
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH222R-LEMDY
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH222R-LEPNY
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH222R-LEPNY
    (Rough Road Area Spec)
    2°30' +/-30'
    (2.5° +/-0.50°)
    KDH222L-LEMDY
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH222L-LEMDY
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    KDH222L-LEPNY
    2°18' +/-30'
    (2.3° +/-0.50°)
    KDH222L-LEPNY
    (Rough Road Area Spec)
    2°30' +/-30'
    (2.5° +/-0.50°)
    LH202R-REMDE
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH202L-REMDE
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH202L-RDMDE
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH212R-JEMDE
    2°36' +/-30'
    (2.6° +/-0.50°)
    LH212L-JEMDE
    2°36' +/-30'
    (2.6° +/-0.50°)
    LH222R-LEMDE
    2°18' +/-30'
    (2.3° +/-0.50°)
    LH222R-LEMDE
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)
    LH222L-LEMDE
    2°18' +/-30'
    (2.3° +/-0.50°)
    LH222L-LEMDE
    (Rough Road Area Spec)
    2°24' +/-30'
    (2.4° +/-0.50°)

  1. Tighten the lock nut on the strut bar (rear side).

    Torque:
    138 N*m{ 1410 kgf*cm , 102 ft.*lbf }

← ADJUSTMENT (Jan 2015 – Nov 2015)ADJUSTMENT (Apr 2016 – Dec 2016) →