DISPOSAL
Removal / installation · Vehicles built from Oct 2014
| 1. DISPOSE OF FRONT SHOCK ABSORBER |
With the piston rod extended, hold the front shock absorber obliquely in a vise.

Using a saw or cutting tools, slowly make a hole at approximately 20 mm (0.79 in.) from the weld in the lower end of the front shock absorber to discharge the gas inside.
- NOTICE:
- The gas is colorless, odorless and harmless.
- Cover the saw or cutting tools with a shop rug or a piece of cloth to prevent shards of metal from flying about when discharging the gas.
- The gas is colorless, odorless and harmless.
