2014-2019 Hiace · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. REMOVE FRONT WHEEL

2. SEPARATE FRONT STABILIZER LINK ASSEMBLY

  1. C102008E03
    Hold the front stabilizer link assembly with a wrench and remove the nut.

  1. Remove the retainer and cushion.

  1. Remove the front stabilizer link assembly from front suspension lower arm.

  1. Remove the 2 retainers and cushion.


3. SEPARATE FRONT SHOCK ABSORBER

  1. C102009E02
    Remove the bolt and separate the front shock absorber from the front suspension lower arm.


4. REMOVE FRONT STRUT BAR

  1. C102010E02
    Remove the nut of the strut bar (rear side), washer, strut bar retainer, strut bar cushion and tube.

  1. C102011E01
    Remove the 2 bolts and 2 nuts and separate the strut bar from the front suspension lower arm.


5. REMOVE FRONT LOWER SUSPENSION ARM

  1. C102012E01
    Remove the 2 bolts and 2 nuts from the front lower ball joint.

  1. C102013E02
    Put matchmarks on front suspension No.1 camber adjust cam, front suspension No.2 camber adjust cam and suspension member.

  1. Remove the nut and the following parts.

    1. Washer

    2. Front suspension No.2 camber adjust cam

    3. Front suspension No.1 camber adjust cam

    4. Front suspension lower arm

← COMPONENTS (from Oct 2014)DISASSEMBLY (from Oct 2014) →