REMOVAL
Removal / installation · Vehicles built from Jan 2017
| 1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER (AIR CONDITIONING CONTROL ASSEMBLY) |
| 2. REMOVE NO. 2 POWER OUTLET SOCKET ASSEMBLY |
Using a screwdriver with its tip wrapped in protective tape, detach the claw, then turn the No. 2 power outlet socket assembly.

Text in Illustration *a
Protective Tape
Align the protrusion of the No. 2 power outlet socket assembly with the cutout of the No. 2 power outlet socket cover and then pull the No. 2 power outlet socket assembly out.

| 3. REMOVE NO. 2 POWER OUTLET SOCKET COVER |
Detach the 2 claws to remove the No. 2 power outlet socket cover.

