2014-2019 Hiace · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


INSPECT TRANSMISSION WIRE

  1. C102326E05
    w/ Flex Lock-up:
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    ATF temperature
    Specified Condition
    1 (OT+) - 5 (OT-)
    10°C (50°F)
    6.445 kΩ
    1 (OT+) - 5 (OT-)
    110°C (230°F)
    0.247 kΩ

    Text in Illustration 
    *a
    Component without harness connected
    (Transmission Wire)
    If the result is not as specified, replace the transmission wire (ATF temperature sensor).

← INSPECTION (Oct 2014 – Dec 2016)INSTALLATION (Oct 2014 – Dec 2014) →