REMOVAL
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH NO. 2
|
 |
- Using a moulding remover D, detach the 3 claws and remove the instrument cluster finish panel garnish No. 2.
| 2.
REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
|
 |
for Standard Body:
Using a moulding remover D, detach the 4 claws in the order shown in the illustration.
for Wide Body:
Using a moulding remover D, detach the 5 claws in the order shown in the illustration.


Text in Illustration
*A
|
for Standard Body
|
*B
|
for Wide Body
|
- Apply protective tape as shown in the illustration.
Text in Illustration
*1
|
Protective Tape
|
Using a moulding remover D, detach the claw.
- Detach the claw as shown in the illustration.
- Detach the 3 claws as shown in the illustration.
- Detach the 2 claws as shown in the illustration.
for Standard Body:
Detach the 3 claws and remove the instrument cluster finish panel sub-assembly center.
for Wide Body:
Detach the 4 claws and remove the instrument cluster finish panel sub-assembly center.


Text in Illustration
*A
|
for Standard Body
|
*B
|
for Wide Body
|
| 3.
REMOVE RADIO RECEIVER ASSEMBLY |
 |
Remove the 4 screws.


Text in Illustration
*A
|
w/ CD Player
|
*B
|
w/o CD Player
|
Detach the 2 guides and remove the radio receiver assembly.
Disconnect each connector.
| 4.
REMOVE RADIO BRACKET NO. 1 |
 |
- Remove the 3 screws and radio bracket No. 1.
| 5.
REMOVE RADIO BRACKET NO. 2 |
 |
- Remove the 3 screws and radio bracket No. 2.