2014-2019 Hiace · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. REMOVE BACK DOOR SCUFF PLATE

  1. B106176E01
    Detach the 7 clips and 4 claws and remove the back door scuff plate.


2. REMOVE BACK DOOR WEATHERSTRIP

3. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

  1. B103256
    Remove the bolt and disconnect the front seat outer belt assembly LH.

  1. B103245E02
    Using a screwdriver, detach the 2 claws and open the cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B103246
    Remove the bolt and disconnect the front seat outer belt assembly LH.


4. REMOVE QUARTER TRIM PANEL ASSEMBLY REAR LH

  1. B113348
    Detach the 35 clips and remove the quarter trim panel assembly rear LH.


5. REMOVE QUARTER PILLAR GARNISH LH

  1. B106184E02
    Detach the 6 clips and remove the quarter pillar garnish LH.


6. REMOVE ROOF SIDE GARNISH INNER UPPER LH

  1. B113352
    Using a screwdriver, detach the 6 clips and remove the roof side garnish inner upper LH.

    HINT:
    Tape the screwdriver tip before use.


7. REMOVE REAR SIDE WINDOW GLASS

  1. B115250
    Apply protective tape to the outer surface of the vehicle body to prevent scratches.

  1. From the interior, insert piano wires between the vehicle body and back door glass as shown in the illustration.

  1. Tie objects that can serve as handles (for example, wooden blocks) to all wire ends.

    NOTICE:
    When separating the back door glass from the vehicle, be careful not to damage the vehicles paint or interior/exterior ornaments.

  1. Cut through the adhesive by pulling the piano wire around the back door glass.

  1. Using a suction cup, remove the back door glass.

    NOTICE:
    Leave as much adhesive on the vehicle body as possible when removing the back door glass.

← REMOVAL (Oct 2014 – Mar 2016)REMOVAL (from Jan 2017) →