INSTALLATION
Removal / installation · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY (for LHD) |
 |
Install the headlight dimmer switch assembly to the steering column, making sure that the stopper protrusions and cutout parts align.
- While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
Connect the connector.
| 2.
INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY (for RHD) |
 |
w/o Entry and Start System:
- Install the headlight dimmer switch assembly to the steering column, making sure that the stopper protrusions and cutout parts align.
- While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
Connect the connector.
w/ Entry and Start System:
- Attach the 3 claws to install the headlight dimmer switch assembly.
Connect the connector.
| 3.
INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY
|
 |
Attach the claw to install the windshield wiper switch assembly.
Connect the 2 connectors.
| 4.
INSTALL SPIRAL CABLE SUB-ASSEMBLY |
 |
(Click here)
| 5.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 6.
CHECK SRS WARNING LIGHT |
 |
(Click here)