REMOVAL
Removal / installation · Vehicles built from Oct 2014
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE RADIATOR GRILLE (for Standard Body) |
Put protective tape around the radiator grille.

Text in Illustration *1
Protective Tape
Remove the 4 clips and 2 screws.

Detach the 8 claws and remove the radiator grille.
| 2. REMOVE FRONT BUMPER ASSEMBLY (for Wide Body) |
| 3. REMOVE HEADLIGHT ASSEMBLY LH |
![]() ![]() |
for Standard Body:
Put protective tape around the headlight assembly LH.
Text in Illustration *1
Protective Tape
Remove the 2 screws.
Detach the guide and pin.
Text in Illustration *2
Guide
*3
Pin
Disconnect each connector and remove the headlight assembly LH.
for Wide Body:

Put protective tape around the headlight assembly LH.
Text in Illustration *1
Protective Tape
Remove the 2 screws.
Detach the guide and pin.
Text in Illustration *2
Guide
*3
Pin
Disconnect each connector and remove the headlight assembly LH.

