2014-2019 Hiace · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Oct 2014

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL HEADLIGHT CORD

E289550E01
  1. Connect the grommet to install the headlight cord.

    Text in Illustration 
    *1
    Grommet

  1. Attach the 3 guides.

  1. Connect the connector.


2. INSTALL HEADLIGHT GASKET
  1. Install a new headlight gasket to the No. 1 headlight back cover.


3. INSTALL NO. 1 HEADLIGHT BACK COVER
  1. Attach the guide to install the No. 1 headlight back cover.

  1. Install the screw.


4. INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH
  1. Connect the connector.

  1. E289546
    Turn the headlight light control ECU sub-assembly LH in the direction indicated by the arrow to install the headlight light control ECU sub-assembly LH.


5. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING
  1. Install a new headlight leveling motor base packing to the headlight unit LH.


6. INSTALL HEADLIGHT LEVELING MOTOR LH

E289528E01
  1. Insert the headlight leveling motor LH and turn the aiming screw in the direction of the arrow shown in the illustration to install the headlight leveling motor LH.

    Text in Illustration 
    *1
    Aiming Screw

  1. E289526
    Rotate the headlight leveling motor LH in the direction of the arrow shown in the illustration and attach the claw.


7. INSTALL CLEARANCE LIGHT BULB

E289542
  1. Install the clearance light bulb to the headlight cord.

  1. E289540
    Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow to install them as a unit.


8. INSTALL FRONT TURN SIGNAL LIGHT BULB

E289524
  1. Install the front turn signal light bulb to the front turn signal light socket.


9. INSTALL FRONT TURN SIGNAL LIGHT SOCKET

E289543
  1. Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow to install them as a unit.


10. INSTALL NO. 2 HEADLIGHT COVER LH
  1. Install the No. 2 headlight cover LH to the headlight unit LH.


11. INSTALL NO. 1 HEADLIGHT BULB

E289536
  1. Turn the No. 1 headlight bulb in the direction indicated by the arrow to install it.

    NOTICE:
    Do not touch the No. 1 headlight bulb glass.

← ADJUSTMENT (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2014) →