REMOVAL
Removal / installation · Vehicles built from Oct 2014
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH |
![]() ![]() |
Put protective tape around the rear combination light assembly LH.
Remove the 2 screws.
Move the rear combination light assembly LH in the direction of the arrow in the illustration, and detach the 2 pins.
Text in Illustration *1
Protective Tape
*2
Pin
Disconnect the connector and remove the rear combination light assembly LH.


