2014-2019 Hiace · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. REMOVE BACK DOOR INSIDE HANDLE (w/ Back Door Inside Handle)

  1. B101148
    Remove the screw and the back door inside handle assembly.


2. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Inside Handle Bezel)

B389406E02
  1. w/o Illumination:

    1. Remove the 2 screws and the back door inside handle bezel.

  1. w/ Illumination:

    1. Remove the 2 screws and the back door inside handle bezel.

    2. Disconnect the connector.

      Text in Illustration 
      *A
      w/o Illumination
      *B
      w/ Illumination


3. REMOVE BACK DOOR TRIM BOARD (for Board)

  1. B101151
    Using a clip remover, remove the 16 clips and the back door trim board.


4. REMOVE BACK DOOR TRIM BOARD (for Molded Door Trim)

  1. B366846
    Remove the 2 screws.

  1. Using a clip remover, remove the 18 clips and the back door trim board.


5. REMOVE BACK DOOR OUTSIDE GARNISH
  1. w/ Smart Entry and Start System:

    1. Disconnect the 2 connectors.

  1. w/o Smart Entry and Start System:

    1. Disconnect the connector.

  1. B361952
    Remove the 5 nuts.

  1. Detach the 2 clips and remove the back door outside garnish.

  1. B103905
    Remove the grommet.


6. REMOVE LICENSE PLATE LIGHT ASSEMBLY

  1. E256828E01
    Remove the 2 screws and detach the 2 wire harness clamps.

  1. Remove the 2 license plate lights from the back door outside garnish in the order shown in the illustration.

← COMPONENTS (from Oct 2014)REMOVAL (from Jan 2017) →