REMOVAL
Removal / installation · Vehicles built Dec 2015 – Dec 2016
Versions by build date: Oct 2014 – Nov 2015 Dec 2015 – Dec 2016 from Jan 2017
| 1.
REMOVE BACK WINDOW GLASS HAMMER ASSEMBLY (w/ Hammer) |
 |
(Click here)
| 2.
REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/o Rear Wiper)
|
 |
- Detach the 5 clips and remove the upper back door trim board assembly.
| 3.
REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER (w/ Rear Wiper)
|
 |
- Detach the 6 clips and remove the upper back door trim board assembly.
Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.
| 4.
REMOVE HIGH MOUNTED STOP LIGHT ASSEMBLY |
 |
- Disconnect the connector.
Using a screwdriver, detach the 8 claws and remove the high mounted stop light assembly.
Text in Illustration
*1
|
Protective Tape
|
- HINT:
- Tape the screwdriver tip before use.
- Remove the gasket from the high mounted stop light assembly.
- NOTICE:
- When removing the high mounted stop light assembly, replace the gasket with a new one.