REMOVAL
Removal / installation · Vehicles built Dec 2015 – Dec 2016
Versions by build date: Oct 2014 – Nov 2015 Dec 2015 – Dec 2016 from Jan 2017
| 1.
REMOVE REAR WIPER ARM AND BLADE ASSEMBLY |
 |
- Disengage the 3 claws and separate the head cap as shown in the illustration.
Remove the rear wiper arm nut and rear wiper arm and blade assembly.
| 2.
REMOVE REAR WIPER SHAFT COVER |
 |
- Remove the rear wiper shaft cover.
| 3.
REMOVE REAR NO.1 WIPER LINK PIVOT WASHER |
 |
- Using the socket wrench (27 mm), remove the lock nut and rear No.1 wiper link pivot washer.
- NOTICE:
- Do not damage the glass.
| 4.
REMOVE BACK WINDOW GLASS HAMMER ASSEMBLY (w/ Hammer) |
 |
(Click here)
| 5.
REMOVE BACK DOOR TRIM BOARD ASSEMBLY UPPER
|
 |
- Detach the 6 clips and remove the upper back door trim board assembly.
Remove the remaining clips on the body, and reinstall them to the upper back door trim board assembly.
| 6.
REMOVE REAR WIPER MOTOR |
 |
- Disconnect the connector and remove the clamp.
Remove the 3 bolts and rear wiper motor and grommet as a unit.
- Remove the grommet from the rear wiper motor.