ADJUSTMENT
Removal / installation · Vehicles built from Oct 2014
| 1. ADJUST WASHER NOZZLE |
Using a Toyota 4 Way Nozzle Adjustment Tool, insert the convex portion of the adjustment tool into the concave portion of the nozzle jet and make the adjustment.
- NOTICE:
- Check which type of washer nozzle is being adjusted because two types (φ4 mm and φ5 mm) exist.
- Do not use a metal pin or other such tool because it may damage the nozzle jet.


- Check which type of washer nozzle is being adjusted because two types (φ4 mm and φ5 mm) exist.
- HINT:
- The adjustment tool is made by DENSO and the part number is 95060-10010.
