2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT THERMOSTAT

G035894

HINT:
The valve opening temperature is inscribed on the thermostat.

  1. Immerse the thermostat in water and then gradually heat the water.

  1. Check the valve opening temperature of the thermostat.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    If the valve opening temperature is not within the specified range, replace the thermostat.

  1. A224964
    Check the valve lift.

    Standard valve lift:
    10 mm (0.394 in.) or more at 95°C (203°F)

    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is below 77°C (171°F).
    If it is not fully closed, replace the thermostat.

← REMOVAL (from Jan 2017)INSTALLATION (from Jan 2017) →