DISASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE RECLINING ADJUSTER RELEASE HANDLE |
 |
- Using a screwdriver, detach the claw and remove the reclining adjuster release handle.
- HINT:
- Tape the screwdriver tip before use.
| 2.
REMOVE FRONT SEAT CUSHION SHIELD INNER NO. 1 LH |
 |
- Detach the 2 claws and remove the 2 screws and front seat cushion shield inner No. 1 LH.
| 3.
REMOVE FRONT SEAT CUSHION SHIELD INNER LH |
 |
- Detach the front seat inner belt assembly wire.
- Detach the 2 claws and remove the 2 screws and front seat cushion shield inner LH.
| 4.
REMOVE FRONT SEAT INNER BELT ASSEMBLY
|
 |
- for Driver side:
Disengage the 3 clamps.
- for Passenger side:
Disconnect the connector.
Disengage the 5 clamps.
- Remove the bolt and front seat inner belt assembly.
| 5.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
 |
Remove the 2 clips and 2 hog rings.
- Detach the hook and remove the separate type front seat cushion cover with pad.
| 6.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
 |
- Remove the 9 hog rings and separate type front seat cushion cover.
| 7.
REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD |
|
| 8.
REMOVE FRONT SEAT HEADREST ASSEMBLY |
|
| 9.
REMOVE FRONT SEAT HEADREST SUPPORT |
 |
- Detach the hooks and remove the 3 hog rings.
- Detach the 2 claws and remove the front seat headrest support.
| 10.
REMOVE FRONT SEAT HEADREST SUPPORT |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 11.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
|
| 12.
REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
 |
- Remove the 3 hog rings and separate type front seatback cover.
| 13.
REMOVE SEPARATE TYPE FRONT SEATBACK PAD |
|
| 14.
REMOVE RECLINING ADJUSTER INSIDE COVER LH |
 |
- Detach the 2 claws and remove the screw and reclining adjuster inside cover LH.
| 15.
REMOVE RECLINING ADJUSTER INSIDE COVER RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 16.
REMOVE RECLINING ADJUSTER INSIDE COVER LH |
 |
- Detach the claw and remove the screw and reclining adjuster inside cover LH.
| 17.
REMOVE RECLINING ADJUSTER INSIDE COVER RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 18.
REMOVE FRONT SEAT WITH ADJUSTER FRAME ASSEMBLY |
|