2014-2019 Hiace · Service Manual ENGINE

PRECAUTION

Precautions · Vehicles built Jan 2015 – Mar 2016

Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1.INITIALIZATION

NOTICE:
  1. Perform initialization (throttle position) after replacing or cleaning the throttle body with motor assembly.
    (Click here)
  2. Perform initialization (throttle position) after reconnecting the battery cable or replacing the ECM.
    (Click here)
  3. Perform Registration (VIN registration) when replacing the ECM.
    (Click here)
  4. If the ECM is replaced, register the ECU communication ID for Engine Immobiliser System.
    (refer to the Service Bulletin for registration).

HINT:
Initialization cannot be completed by only removing the battery.


2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
    (Click here)
  2. When disconnecting the cable from the negative (-) auxiliary battery terminal while performing repairs, some systems need to be initialized after the cable is reconnected.
    (Click here)


3.FOR USING GTS

CAUTION:
  1. Observe the following items for safety reasons:
    1. Read its instruction books before using the GTS.
    2. Prevent the GTS cable from being caught on the pedals, shift lever and steering wheel when driving with the GTS connected to the vehicle.
    3. When driving the vehicle for testing purposes using the GTS, two persons are required. One drives the vehicle and the other operates the GTS.

← MIL Circuit (Oct 2014 – Dec 2014)PRECAUTION (Apr 2016 – Dec 2016) →