INSTALLATION
Removal / installation · Vehicles built from Jan 2015
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- Use the same procedure for the RH and LH sides.
| 1. INSTALL VSC OFF SWITCH |
Attach the 2 claws to install the VSC OFF switch to the No. 2 instrument cluster finish panel sub-assembly.
Connect the connector.
| 2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Attach the 6 claws and a hooks to install the instrument cluster finish panel sub-assembly.
| 3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
Attach the 4 claws to install the instrument cluster finish panel assembly.
| 4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 3 claws to install the instrument cluster finish panel garnish No. 1.
| 5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
for Standard Body:
Attach the 14 claws to install the instrument cluster finish panel sub-assembly center.
for Wide Body:
Attach the 16 claws to install the instrument cluster finish panel sub-assembly center.
| 6. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH |
Attach the 3 claws to install the instrument cluster finish panel garnish No. 2.
