REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL CENTER SEATBACK FRAME SUB-ASSEMBLY |
| 2. INSTALL CENTER SEATBACK PAD |
| 3. INSTALL FRONT SEATBACK COVER CENTER |
Using hog ring pliers, install the front seatback cover center to the center seatback pad with 3 new hog rings.

- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.
| 4. INSTALL FRONT SEAT HEADREST SUPPORT |
| 5. INSTALL FRONT SEAT HEADREST SUPPORT |
| 6. INSTALL FRONT SEAT HEADREST ASSEMBLY |
| 7. INSTALL CENTER SEAT HINGE COVER UPPER RH |
| 8. INSTALL CENTER SEAT HINGE COVER UPPER LH |
| 9. INSTALL CENTER SEAT CUSHION PAD |
| 10. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY |
Using hog ring pliers, install the center seat cushion cover sub-assembly to the center seat cushion pad with 12 new hog rings.

- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.
| 11. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
Install the center seat cushion cover sub-assembly with pad with the 4 bolts.

- Torque:
- 41 N*m{ 418 kgf*cm , 30 ft.*lbf }
| 12. INSTALL CENTER SEAT HINGE COVER RH |
| 13. INSTALL CENTER SEAT HINGE COVER LH |
| 14. INSTALL RECLINING ADJUSTER RELEASE HANDLE |
