REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE SLIDE DOOR WINDOW GARNISH |
 |
- Disengage the 4 clips and remove the slide door window garnish.
| 2.
REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY |
 |
- Using a "torx" socket wrench (T25), remove the 2 "torx" screws.
- Disengage the 19 clips and claw, and remove the rear door trim board sub-assembly.
| 3.
REMOVE SLIDE DOOR SERVICE HOLE NO.1 COVER |
 |
- Disengage the clamp.
Disconnect the cable from the slide door lock remote control assembly.
Remove the slide door service hole No.1 cover.
| 4.
REMOVE SLIDE DOOR CLOSER RELAY |
 |
- Disconnect the connector.
Remove the bolt and the slide door closer relay.