DISASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY |
 |
- Using a piece of cloth, etc., remove the snap ring and reclining release handle sub-assembly.
| 2.
REMOVE RECLINING ADJUSTER COVER LH |
 |
- Remove the 2 screws.
Disengage the claw and remove the reclining adjuster cover LH as shown in the illustration.
| 3.
REMOVE RECLINING ADJUSTER COVER RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 4.
REMOVE NO. 1 SEAT BACK COVER SUB-ASSEMBLY |
 |
- Operate the reclining release handle sub-assembly and fold down the seatback onto the seat cushion as shown in the illustration.
- Open the fastener of the No.1 seatback cover sub-assembly.
Remove the No.1 seatback cover sub-assembly.
| 5.
REMOVE NO. 1 SEAT LEG STOPPER HOLDER |
|
| 6.
REMOVE REAR SEAT LEG STOPPER |
|
| 7.
REMOVE REAR SEAT INNER BELT ASSEMBLY
|
 |
- Remove the bolt and rear seat belt assembly inner.
| 8.
REMOVE REAR SEAT OUTER BELT ASSEMBLY
|
 |
- Remove the bolt and rear seat belt assembly outer.
| 9.
REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE |
 |
- Remove the 2 screws and 2 No. 1 reclining adjuster release handles.
| 10.
REMOVE REAR SEAT BACK LOCK COVER |
 |
- Remove the 4 screws and 2 rear seat back lock covers.
| 11.
REMOVE REAR SEAT LOCK ROD |
 |
- Remove the 2 nuts and rear seat lock rod.
| 12.
REMOVE REAR NO. 1 SEAT LOCK ASSEMBLY |
 |
- Remove the 2 bolts and 2 rear No. 1 seat lock assemblies.
| 13.
REMOVE REAR NO. 1 SEAT LEG SUB-ASSEMBLY |
 |
- Remove the 2 springs.
- Remove the 2 E-rings, 2 pins and No. 1 seat leg sub-assembly rear.
| 14.
REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
- Separate the 2 hook and loop fasteners.
- Open the fastener and remove the No. 1 seat cushion cover sub-assembly.
| 15.
REMOVE NO. 1 SEAT CUSHION SPRING ASSEMBLY |
|