2014-2019 Hiace · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. INSTALL NO. 1 SEAT CUSHION SPRING ASSEMBLY

2. INSTALL NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY

  1. B101717
    Install the No. 1 seat cushion cover sub-assembly and close the fastener.

  1. B183822
    Engage the 2 hook and loop fasteners.


3. INSTALL REAR NO. 1 SEAT LEG SUB-ASSEMBLY

B179978
  1. Install the rear No. 1 seat leg sub-assembly with the 2 E-rings and 2 pins.

  1. B179977
    Install the 2 springs.


4. INSTALL REAR NO. 1 SEAT LOCK ASSEMBLY

  1. B179976
    Install the 2 rear No. 1 seat lock assemblies with the 2 bolts.

    Torque:
    41 N*m{ 418 kgf*cm , 30 ft.*lbf }


5. INSTALL REAR SEAT LOCK ROD

  1. B179975
    Install the rear seat lock rod with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }


6. INSTALL REAR SEAT BACK LOCK COVER

  1. B179974
    Install the 2 rear seat back lock covers with the 4 screws.


7. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE

  1. B179973
    Install the 2 No. 1 reclining adjuster release handles with the 2 screws.


8. INSTALL REAR SEAT OUTER BELT ASSEMBLY

  1. B105613
    Install the rear seat belt assembly outer with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


9. INSTALL REAR SEAT INNER BELT ASSEMBLY

  1. B105612
    Install the rear seat belt assembly inner with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


10. INSTALL REAR SEAT LEG STOPPER

11. INSTALL NO. 1 SEAT LEG STOPPER HOLDER

12. INSTALL NO. 1 SEAT BACK COVER SUB-ASSEMBLY

  1. B101712
    Install the No. 1 seat back cover sub-assembly.

  1. Operate the reclining release handle sub-assembly and fold down the seat back onto the seat cushion.

  1. B101713
    Close the fastener of the No. 1 seat back cover sub-assembly.


13. INSTALL RECLINING ADJUSTER COVER LH

  1. B183821
    Engage the claw and install the reclining adjuster cover LH.

  1. Install the 2 screws.


14. INSTALL RECLINING ADJUSTER COVER RH

HINT:
Use the same procedures for the RH side and LH side.


15. INSTALL RECLINING RELEASE HANDLE SUB-ASSEMBLY

  1. B183825
    Install the reclining release handle sub-assembly and the snap ring.

← REASSEMBLY (Oct 2014 – Dec 2016)INSTALLATION (from Oct 2014) →