DISASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE RECLINING ADJUSTER COVER RH |
 |
- Remove the 2 screws and reclining adjuster cover RH.
| 2.
REMOVE RECLINING ADJUSTER COVER LH (except Fold Down Type Seat, 4-seater Type) |
 |
- Remove the 2 screws and reclining adjuster cover LH.
| 3.
REMOVE RECLINING ADJUSTER COVER LH (for Fold Down Type Seat, 4-seater Type) |
 |
- Remove the screw.
Detach the 4 claws and remove the reclining adjuster cover LH.
| 4.
REMOVE REAR NO. 1 SEAT INNER CUSHION SHIELD LH (for Fold Down Type Seat, 4-seater Type) |
 |
- Remove the screw and rear No. 1 seat inner cushion shield LH.
| 5.
REMOVE REAR NO. 2 SEAT LEG SIDE COVER |
 |
- Remove the rear No. 2 seat leg side cover.
| 6.
REMOVE REAR NO. 3 SEAT LEG SIDE COVER |
 |
- Remove the rear No. 3 seat leg side cover.
| 7.
REMOVE REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt) |
 |
for Fixed Type Seat:
for 2-leg Type:
(Click here)
for 3-leg Type:
(Click here)
for Fold Down Type Seat:
for 3-seater Type:
(Click here)
for 4-seater Type:
(Click here)
| 8.
REMOVE NO. 1 SEAT LAP TYPE BELT ASSEMBLY (w/ Seat Belt) |
 |
for Fixed Type Seat:
for 2-leg Type:
(Click here)
for 3-leg Type:
(Click here)
for Fold Down Type Seat:
for 3-seater Type:
(Click here)
for 4-seater Type:
(Click here)
| 9.
REMOVE FRONT SEATBACK SHIELD LH (for Fold Down Type Seat, 3-seater Type) |
 |
Detach the 2 hooks and remove the front seatback shield LH.
| 10.
REMOVE FRONT SEATBACK SHIELD RH (for Fold Down Type Seat, 4-seater Type) |
 |
- Detach the 2 hooks and remove the front seatback shield RH.
| 11.
REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
 |
- for 3-seater Type:
Detach the hooks and remove the No. 3 seat cushion cover sub-assembly with pad.
- for 4-seater Type:
Detach the hooks and remove the No. 3 seat cushion cover sub-assembly with pad.
| 12.
REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
Remove the hog rings.


Text in Illustration
*A
|
w/o Seat Belt
|
*B
|
w/ Seat Belt
|
*C
|
for 3-seater Type
|
*D
|
for 4-seater Type
|
Remove the hog rings and No. 3 seat cushion cover sub-assembly from the No. 3 seat cushion pad.


Text in Illustration
*A
|
for 3-seater Type
|
*B
|
for 4-seater Type
|
| 13.
REMOVE REAR SEAT CENTER INNER BELT ASSEMBLY (w/ Seat Belt) |
 |
for Fixed Type Seat:
for 2-leg Type:
(Click here)
for 3-leg Type:
(Click here)
for Fold Down Type Seat:
for 3-seater Type:
(Click here)
for 4-seater Type:
(Click here)
| 14.
REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY (for Fold Down Type Seat, 3-seater Type, w/ Seat Belt)
|
 |
- Remove the bolt and rear seat lap type belt assembly.
| 15.
REMOVE REAR SEAT INNER BELT ASSEMBLY (for Fold Down Type Seat, 3-seater Type, w/ Seat Belt)
|
 |
- Remove the bolt and rear seat inner belt assembly.
| 16.
REMOVE NO. 2 SEAT LEG COVER (for Fold Down Type Seat, 3-seater Type) |
 |
Remove the No. 2 seat leg cover from the No. 3 seat leg sub-assembly.
| 17.
REMOVE NO. 3 SEAT LEG SUB-ASSEMBLY |
 |
for Fold Down Type Seat, 3-seater Type:
Remove the No. 3 seatback assembly RH
- Remove the E-ring and bolt.
Remove the No. 3 seatback assembly RH.
- Remove the 2 bushes from the No. 3 seatback assembly RH.
for Fold Down Type Seat, 4-seater Type:
Remove the No. 3 seatback assembly LH
- HINT:
- Use the same procedure described 3-seater Type RH side.
Remove the 4 bolts and No. 3 seat leg sub-assembly.


Text in Illustration
*A
|
for Fixed Type Seat
|
*B
|
for Fold Down Type Seat, 3-seater Type
|
*C
|
for Fold Down Type Seat, 4-seater Type
|
-
|
-
|
| 18.
REMOVE ASSIST GRIP PLUG |
 |
- Using a screwdriver, detach the 2 claws and remove the assist grip plug.
Text in Illustration
*1
|
Protective Tape
|
- HINT:
- Use the same procedure for all assist grip plugs.
- Tape the screwdriver tip before use.
| 19.
REMOVE ASSIST GRIP |
 |
- Remove the 2 screws and assist grip.
- HINT:
- Use the same procedure for all assist grips.
| 20.
REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY (for Fixed Type Seat) |
 |
- Open the fastener of the No. 3 seatback cover sub-assembly and fold back the cover.
Remove the hog rings and No. 3 seatback cover sub-assembly from the No. 3 seatback pad.


| 21.
REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH (for Fold Down Type Seat, 3-seater Type) |
 |
- Open the fastener of the No. 3 seatback cover sub-assembly LH and fold back the cover.
- Remove the hog rings and No. 3 seatback cover sub-assembly LH from the No. 3 seatback pad LH.
| 22.
REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY RH (for Fold Down Type Seat, 4-seater Type) |
 |
- Open the fastener of the No. 3 seatback cover sub-assembly RH and fold back the cover.
Remove the hog rings and No. 3 seatback cover sub-assembly RH from the No. 3 seatback pad RH.


| 23.
REMOVE RECLINING REMOTE CONTROL LEVER KNOB (for Fold Down Type Seat) |
 |
- Remove the screw and reclining remote control lever knob.
| 24.
REMOVE REAR SEATBACK LOCK CONTROL BEZEL (for Fold Down Type Seat) |
 |
- Remove the screw.
Detach the guide and remove the rear seatback lock control bezel.
| 25.
REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY RH (for Fold Down Type Seat, 3-seater Type) |
 |
- Open the fastener of the No. 3 seatback cover sub-assembly RH and fold back the cover.
- Remove the hog rings and No. 3 seatback cover sub-assembly RH.
| 26.
REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH (for Fold Down Type Seat, 4-seater Type) |
 |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 27.
REMOVE NO. 3 SEATBACK PAD RH (for Fold Down Type Seat, 3-seater Type) |
 |
Remove the No. 3 seatback pad RH from the No. 3 seatback spring assembly RH.
| 28.
REMOVE NO. 3 SEATBACK PAD LH (for Fold Down Type Seat, 4-seater Type) |
 |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 29.
REMOVE REAR SEATBACK LOCK COVER RH (for Fold Down Type Seat, 3-seater Type) |
 |
- Remove the 2 screws.
Detach the guide and remove the rear seatback lock cover RH.
| 30.
REMOVE REAR SEATBACK LOCK COVER LH (for Fold Down Type Seat, 4-seater Type) |
 |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 31.
REMOVE REAR SEATBACK LOCK ASSEMBLY LH (for Fold Down Type Seat, 3-seater Type) |
 |
- Detach the 2 cable clamps from the No. 3 seatback spring assembly RH.
Text in Illustration
*1
|
Clamp
|
*2
|
Cable Clamp
|
Disconnect the cable end from the No. 3 seatback spring assembly RH.
Remove the clamp.
Remove the 2 bolts and rear seatback lock assembly LH.
| 32.
REMOVE REAR SEATBACK LOCK ASSEMBLY RH (for Fold Down Type Seat, 4-seater Type) |
 |
- HINT:
- Use the same procedure described 3-seater Type RH side.