REASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH (for Fold Down Type Seat, 3-seater Type) |
Install the rear seatback lock assembly LH with the 2 bolts.

- Torque:
- 33 N*m{ 337 kgf*cm , 24 ft.*lbf }
Install a new clamp as shown in the illustration.
Text in Illustration *1
Clamp
*2
Cable Clamp
Connect the cable end to the No. 3 seatback spring assembly RH.
Attach the 2 cable clamps to the No. 3 seatback spring assembly RH.
| 2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH (for Fold Down Type Seat, 4-seater Type) |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 3. INSTALL REAR SEATBACK LOCK COVER RH (for Fold Down Type Seat, 3-seater Type) |
Attach the guide and install the rear seatback lock cover RH with the 2 screws.
| 4. INSTALL REAR SEATBACK LOCK COVER LH (for Fold Down Type Seat, 4-seater Type) |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 5. INSTALL NO. 3 SEATBACK PAD RH (for Fold Down Type Seat, 3-seater Type) |
Install the No. 3 seatback pad RH to the No. 3 seatback spring assembly RH.
| 6. INSTALL NO. 3 SEATBACK PAD LH (for Fold Down Type Seat, 4-seater Type) |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 7. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY RH (for Fold Down Type Seat, 3-seater Type) |
Using hog ring pliers, install the No. 3 seatback cover sub-assembly RH to the No. 3 seatback pad RH with new hog rings.

Text in Illustration *1
Hog Ring Pliers
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.
Close the fastener of the No. 3 seatback cover sub-assembly RH.

| 8. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH (for Fold Down Type Seat, 4-seater Type) |
- HINT:
- Use the same procedure described 3-seater Type RH side.
| 9. INSTALL REAR SEATBACK LOCK CONTROL BEZEL (for Fold Down Type Seat) |
Attach the guide and install the rear seatback lock control bezel with the screw.
| 10. INSTALL RECLINING REMOTE CONTROL LEVER KNOB (for Fold Down Type Seat) |
Install the reclining remote control lever knob with the screw.
| 11. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH (for Fold Down Type Seat, 3-seater Type) |
Using hog ring pliers, install the No. 3 seatback cover sub-assembly LH to the No. 3 seatback pad LH with new hog rings.

Text in Illustration *1
Hog Ring Pliers
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.
Close the fastener of the No. 3 seatback cover sub-assembly LH.

| 12. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY RH (for Fold Down Type Seat, 4-seater Type) |
Using hog ring pliers, install the No. 3 seatback cover sub-assembly RH to the No. 3 seatback pad RH with new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.


Text in Illustration *1
Hog Ring Pliers
-
-
Close the fastener of the No. 3 seatback cover sub-assembly RH.

| 13. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY (for Fixed Type Seat) |
Using hog ring pliers, install the No. 3 seatback cover sub-assembly to the No. 3 seatback pad with new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.


Text in Illustration *1
Hog Ring Pliers
-
-
Close the fastener of the No. 3 seatback cover sub-assembly.

| 14. INSTALL ASSIST GRIP |
Install the assist grip with the 2 screws.
- HINT:
- Use the same procedure for all assist grips.
| 15. INSTALL ASSIST GRIP PLUG |
Attach the 2 claws to install the assist grip plug.
- HINT:
- Use the same procedure for all assist grip plugs.
| 16. INSTALL NO. 3 SEAT LEG SUB-ASSEMBLY |
Install the No. 3 seat leg sub-assembly with the 4 bolts.
- Torque:
- 41 N*m{ 418 kgf*cm , 30 ft.*lbf }
for Fold Down Type Seat, 3-seater Type:
Install the No. 3 seatback assembly RH.
Install the bush to the No. 3 seatback assembly RH.

Attach the 3 claws to install the bush to the No. 3 seat leg sub-assembly.

Install the No. 3 seatback assembly RH with the bolt.
- Torque:
- 29 N*m{ 296 kgf*cm , 21 ft.*lbf }
Install a new E-ring to the No. 3 seat leg sub-assembly.

for Fold Down Type Seat, 4-seater Type:
Install the No. 3 seatback assembly LH.- HINT:
- Use the same procedure described 3-seater Type RH side.
| 17. INSTALL NO. 2 SEAT LEG COVER (for Fold Down Type Seat, 3-seater Type) |
Install the No. 2 seat leg cover to the No. 3 seat leg sub-assembly.
| 18. INSTALL REAR SEAT INNER BELT ASSEMBLY (for Fold Down Type Seat, 3-seater Type, w/ Seat Belt) |
Install the rear seat inner belt assembly with the bolt.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
| 19. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (for Fold Down Type Seat, 3-seater Type, w/ Seat Belt) |
Install the rear seat lap type belt assembly with the bolt.

- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
| 20. INSTALL REAR SEAT CENTER INNER BELT ASSEMBLY (w/ Seat Belt) |
for Fixed Type Seat:
for 2-leg Type:
(Click here)for 3-leg Type:
(Click here)
for Fold Down Type Seat:
for 3-seater Type:
(Click here)for 4-seater Type:
(Click here)
| 21. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY |
Using hog ring pliers, install the No. 3 seat cushion cover sub-assembly to the No. 3 seat cushion pad with new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Be careful not to damage the cover.


Text in Illustration *A
for 3-seater Type
*B
for 4-seater Type
*1
Hog Ring Pliers
-
-
Using hog ring pliers, install new hog rings.
- NOTICE:
- Be careful not to damage the cover.
-


Text in Illustration *A
w/o Seat Belt
*B
w/ Seat Belt
*C
for 3-seater Type
*D
for 4-seater Type
*1
Hog Ring Pliers
-
-
| 22. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
for 3-seater Type:
Attach the hooks to install the No. 3 seat cushion cover sub-assembly with pad.
for 4-seater Type:
Attach the hooks to install the No. 3 seat cushion cover sub-assembly with pad.
| 23. INSTALL FRONT SEATBACK SHIELD LH (for Fold Down Type Seat, 3-seater Type) |
Attach the 2 hooks to install the front seatback shield LH.
| 24. INSTALL FRONT SEATBACK SHIELD RH (for Fold Down Type Seat, 4-seater Type) |
Attach the 2 hooks to install the front seatback shield RH.
| 25. INSTALL NO. 1 SEAT LAP TYPE BELT ASSEMBLY (w/ Seat Belt) |
for Fixed Type Seat:
for 2-leg Type:
(Click here)for 3-leg Type:
(Click here)
for Fold Down Type Seat:
for 3-seater Type:
(Click here)for 4-seater Type:
(Click here)
| 26. INSTALL REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt) |
for Fixed Type Seat:
for 2-leg Type:
(Click here)for 3-leg Type:
(Click here)
for Fold Down Type Seat:
for 3-seater Type:
(Click here)for 4-seater Type:
(Click here)
| 27. INSTALL REAR NO. 3 SEAT LEG SIDE COVER |
Install the rear No. 3 seat leg side cover.
| 28. INSTALL REAR NO. 2 SEAT LEG SIDE COVER |
Install the rear No. 2 seat leg side cover.
| 29. INSTALL REAR NO. 1 SEAT INNER CUSHION SHIELD LH (for Fold Down Type Seat, 4-seater Type) |
Install the rear No. 1 seat inner cushion shield LH with the screw.
| 30. INSTALL RECLINING ADJUSTER COVER LH (for Fold Down Type Seat, 4-seater Type) |
Attach the 4 claws to install the reclining adjuster cover LH with the screw.
| 31. INSTALL RECLINING ADJUSTER COVER LH (except Fold Down Type Seat, 4-seater Type) |
Install the reclining adjuster cover LH with the 2 screws.
| 32. INSTALL RECLINING ADJUSTER COVER RH |
Install the reclining adjuster cover RH with the 2 screws.
