REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE BATTERY SERVICE HOLE COVER |
 |
Roll up the carpet.
Remove the battery service hole cover.
| 2.
SEPARATE AIR HOSE NO.5 |
 |
- Loosen the clip, and separate air hose No.5.
| 3.
REMOVE AIR PUMP ASSEMBLY W/ BRACKET |
 |
- Remove the 3 bolts and the air pump connector.
Remove the air pump assembly w/ bracket.
| 4.
REMOVE AIR PUMP INLET |
 |
- Loosen the clip, and remove the air pump inlet.
| 5.
REMOVE AIR HOSE NO.5 |
 |
Loosen the clip, and remove the air hose No.5.
| 6.
REMOVE AIR PUMP BRACKET |
 |
Disconnect the wire harness connector from the air pump bracket.
- Remove the air pump from the bracket w/ air pump insulators.