2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jan 2015 – Mar 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT SEAT ASSEMBLY RH
(Click here)

4. REMOVE FRONT DOOR SCUFF PLATE RH

5. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY
  1. Roll up the carpet, and remove the 5 bolts and engine service hole sub cover sub-assembly.


6. REMOVE BATTERY SERVICE HOLE COVER
  1. Roll up the floor carpet.

  1. Remove the battery service hole cover.


7. REMOVE AIR PUMP INLET PIPE

  1. A113521E02
    Slide the clamp and disconnect the No. 6 air hose.
    Text in Illustration 
    *1
    No. 5 Air Hose
    *2
    Air Pump Inlet Pipe
    *3
    No. 6 Air Hose

  1. Slide the clamp and disconnect the No. 5 air hose.

  1. Remove the 2 bolts and air pump inlet pipe.


8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

  1. A113523
    Remove the 4 bolts and No. 1 exhaust manifold heat insulator.


9. REMOVE NO. 4 INTAKE PIPE

  1. A099544E02
    Remove the 4 nuts and No. 4 intake pipe.

  1. Remove the 2 gaskets.


10. REMOVE AIR SWITCHING VALVE ASSEMBLY

  1. A099545E02
    Disconnect the air switching valve connector.

  1. Remove the 2 nuts and air switching valve assembly.

← REMOVAL (Oct 2014 – Dec 2014)REMOVAL (Apr 2016 – Dec 2016) →