2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  1. Loosen the nut.

  1. Disconnect the cable from the negative (-) battery terminal.


3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL
  1. Loosen the nut.

  1. Disconnect the cable from the negative (+) battery terminal.


4. REMOVE BATTERY CLAMP SUB-ASSEMBLY

  1. A336755
    Loosen the nut and remove the bolt and battery clamp sub-assembly.


5. REMOVE BATTERY

6. REMOVE BATTERY CARRIER

  1. A310240
    Disconnect the battery thermometer sensor connector.

  1. Detach the wire harness clamp from the battery carrier.

  1. Remove the 3 bolts and battery carrier.


7. REMOVE CHARCOAL CANISTER ASSEMBLY

  1. A114747
    Slide the 2 clamps and disconnect the 2 purge line hoses.

  1. Remove the charcoal canister assembly from bracket.

← REMOVAL (Jan 2015 – Mar 2016)REMOVAL (from Jan 2017) →