INSTALLATION
Removal / installation · Vehicles built from Oct 2014
| 1. INSTALL VENTILATION VALVE SUB-ASSEMBLY |
Apply a light coat of engine oil to the O-ring.

Install the ventilation valve.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
- HINT:
- When reusing the ventilation valve, inspect the O-ring.
Connect the ventilation hose to the ventilation valve.
Secure the hose with the clamp.
| 2. INSTALL ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY |
Install the engine service hole sub cover with the 5 bolts.
- Torque:
- 13 N*m{ 133 kgf*cm , 10 ft.*lbf }
| 3. INSTALL FRONT DOOR SCUFF PLATE RH |
| 4. INSTALL FRONT SEAT ASSEMBLY RH (for Hi-back Seat Type) |
Perform the same procedure as above on the opposite side. (Click here)
| 5. INSTALL FRONT SEAT ASSEMBLY RH (for Low-back Seat Type) |
Perform the same procedure as above on the opposite side. (Click here)
