DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE HEATER COVER |
Remove the 3 screws and heater cover.

| 2. REMOVE REAR HEATER BLOWER RESISTOR |
Disconnect the connector.

Remove the 2 screws and rear heater blower resistor.
| 3. REMOVE HEATER UNIT REAR HEATER WATER INLET HOSE |
Using pliers, grip the claw of the clip and slide the clip to disconnect the heater unit rear heater water inlet hose.

| 4. REMOVE HEATER UNIT REAR HEATER WATER OUTLET HOSE |
- HINT:
- Disconnection of the heater unit rear heater water outlet hose is the same way as the heater unit rear heater water inlet hose.
| 5. REMOVE HEATER COVER (PIPE COVER) |
LHD:

Remove the 3 screws and heater cover.
RHD:

Remove the 4 screws and heater cover.
| 6. REMOVE REAR HEATER UNIT SUB-ASSEMBLY |
Remove the rear heater unit sub-assembly.

| 7. REMOVE HEATER COVER (MOTOR COVER) |
Remove the 3 screws and heater cover.

| 8. REMOVE REAR HEATER BLOWER MOTOR SUB-ASSEMBLY |
Disconnect the connector.

Remove the 3 screws and rear heater blower motor sub-assembly.

| 9. REMOVE AIR DUCT REAR NO.1 |
Remove the 3 screws and the air duct rear No.1.

