DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE BACK STEP SUB-ASSEMBLY (w/ Back Step) |
 |
- Remove the 5 bolts and back step sub-assembly.
| 2.
REMOVE REAR BUMPER BRACKET CENTER |
 |
- Remove the 4 bolts and 4 rear bumper bracket centers.
| 3.
REMOVE REAR BUMPER SIDE SUPPORT NO.2 LH |
 |
- Remove the 2 screws.
Release the 2 grommet and remove the rear bumper side support No.2 LH.
| 4.
REMOVE REAR BUMPER SIDE SUPPORT NO.2 RH |
|
| 5.
REMOVE REAR COMBINATION LIGHT ASSEMBLY LH
|
 |
- Remove the 2 screws.
Pull in the direction indicated by the arrow, disengage the 2 pins and separate the rear combination light assembly.
Disconnect the connector and remove the rear combination light assembly.
| 6.
REMOVE REAR COMBINATION LIGHT ASSEMBLY RH |
|
| 7.
REMOVE REAR BUMPER COVER UPPER LH |
 |
- Remove the screw.
Release the clip and 3 claws and remove the rear bumper cover upper.
| 8.
REMOVE REAR BUMPER COVER UPPER RH |
|