REMOVAL
Removal / installation · Vehicles built Apr 2016 – Dec 2016
Versions by build date: Oct 2014 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER |
Using a clip remover, remove the 2 clips.

Detach the 4 clips and remove the instrument panel finish lower.
Disconnect each connector.
Push the positions indicated by the arrows in the illustration to disconnect the fuel lid lock control cable and bonnet (hood) control cable assembly from the instrument panel finish lower.

| 2. REMOVE RADIO ANTENNA POLE |
Disconnect the connector and 2 clamps.

Tie a string to the radio antenna pole.
- HINT:
- Leave the string in the vehicle. It will be used when installing the pole.
Using a T20 "TORX" socket wrench, remove the 2 screws and radio antenna pole.

- NOTICE:
- Removal and installation can be performed up to 3 times.
Untie the string from the radio antenna pole.
