Removal / installation · Vehicles built from Oct 2014
1.
INSTALL REAR NO. 1 SEAT ASSEMBLY
Secure the rear No. 1 seat assembly with the 2 locks.
Install the rear No. 1 seat assembly with the 2 bolts.
Torque:
39 N*m{
398 kgf*cm
, 29 ft.*lbf
}
NOTICE:
After installing the rear No.1 seat assembly, fold down the seatback onto the seat cushion, lift the rear section of the rear No.1 seat assembly, and drop it to engage the locks securely.
Install the cover with the claw.
HINT:
Use the same procedures for the RH side and LH side.