DISASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE RECLINING RELEASE HANDLE SUB-ASSEMBLY |
 |
- Using a piece of cloth, etc., remove the snap ring and reclining release handle sub-assembly.
- HINT:
- Use the same procedures for the RH side and LH side.
| 2.
REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.1 LH |
 |
- Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.1 LH.
- HINT:
- Tape the screwdriver tip before use.
| 3.
REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.1 RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 4.
REMOVE RECLINING ADJUSTER COVER LH |
 |
- Remove the 2 screws.
Disengage the claw and clip and remove the reclining adjuster cover LH.
| 5.
REMOVE RECLINING ADJUSTER COVER RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 6.
REMOVE REAR SEATBACK COVER LH |
 |
- Remove the rear seat hinge pin and rear seatback cover LH.
| 7.
REMOVE REAR SEATBACK COVER RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 8.
REMOVE REAR SEAT HINGE PIN |
|
| 9.
REMOVE REAR SEAT RECLINING COVER NO.2 LH |
 |
- Disengage the 6 claws and remove the rear seat reclining cover No.2 LH.
| 10.
REMOVE REAR SEAT RECLINING COVER NO.2 RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 11.
REMOVE NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
 |
- Disengage the hook and remove the No.1 seat cushion cover sub-assembly with pad.
| 12.
REMOVE NO.1 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
Remove the 14 hog rings and No.1 seat cushion cover sub-assembly.


| 13.
REMOVE NO.1 SEAT CUSHION PAD |
|
| 14.
REMOVE REAR SEAT HEADREST ASSEMBLY |
|
| 15.
REMOVE REAR SEAT HEADREST SUPPORT |
 |
- Operate the reclining release handle sub-assembly and fold down the seatback onto the seat cushion as shown in the illustration.
- Open the fastener of the No.1 seatback cover sub-assembly.
Remove the 6 hog rings.


Operate the reclining release handle sub-assembly and return the seatback to the upright position.
Disengage the 4 claws and remove the 2 rear seat headrest supports.


| 16.
REMOVE REAR SEAT HEADREST SUPPORT |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 17.
REMOVE NO.1 SEATBACK COVER SUB-ASSEMBLY WITH PAD |
|
| 18.
REMOVE NO.1 SEATBACK COVER SUB-ASSEMBLY |
 |
Remove the 6 hog rings and No.1 seatback cover sub-assembly.


| 19.
REMOVE NO.1 SEATBACK PAD |
|
| 20.
REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 LH |
 |
- Disengage the claw and remove the rear seat cushion shield inner No.1 LH.
| 21.
REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 22.
REMOVE REAR SEAT RECLINING COVER NO.1 LH |
 |
- Remove the screw and rear seat reclining cover No.1 LH.
| 23.
REMOVE REAR SEAT RECLINING COVER NO.1 RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 24.
REMOVE NO.1 SEATBACK SPRING ASSEMBLY |
 |
- Remove the 4 bolts and No.1 seatback spring assembly.
| 25.
REMOVE REAR SEAT LEG SIDE COVER |
 |
- Remove the 2 screws.
- Remove the 2 bolts, 2 brackets and rear seat leg side covers.
| 26.
REMOVE REAR SEAT LOCK HANDLE KNOB |
|
| 27.
REMOVE REAR SEATBACK LOCK COVER |
 |
- Remove the 4 screws and 2 rear seatback lock covers.
| 28.
REMOVE REAR SEAT BELT ASSEMBLY OUTER (w/ Seat Belt)
|
 |
- HINT:
- Follow the same procedure as for the fixed seat type.
| 29.
REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- HINT:
- Follow the same procedure as for the fixed seat type.
| 30.
REMOVE REAR NO.1 SEAT LOCK ASSEMBLY |
 |
- w/o Seat belt:
Remove the 6 bolts and 2 rear No.1 seat lock assemblies.
- w/ Seat belt:
Remove the 4 bolts and 2 rear No.1 seat lock assemblies.
| 31.
REMOVE NO.1 SEAT LEG STOPPER HOLDER |
|
| 32.
REMOVE REAR SEAT LEG STOPPER |
|
| 33.
REMOVE REAR SEAT CUSHION HINGE COVER LOWER |
 |
- Remove the 2 rear seat cushion springs.
Remove the 3 E-rings, 3 washers, 3 rear seat hinge pins and rear seat cushion hinge cover lower with No.1 seat leg sub-assembly rear.
- Remove the 4 screws and 2 rear seat cushion hinge cover lowers.
| 34.
REMOVE REAR SEAT HINGE PIN |
|
| 35.
REMOVE NO.1 SEAT LEG SUB-ASSEMBLY REAR |
|
| 36.
REMOVE SEAT TRACK ADJUSTING HANDLE KNOB |
 |
- Remove the 2 screws and seat track adjusting handle knob.
| 37.
REMOVE REAR SEAT CUSHION UNDER COVER |
 |
- Remove the 11 screws and rear seat cushion under cover.
| 38.
REMOVE WARNING REFLECTOR HOLDER ASSEMBLY |
 |
- Remove the 4 screws and 4 warning reflector holder assemblies.
| 39.
REMOVE NO.1 SEAT LEG SUB-ASSEMBLY |
 |
- Remove the 4 bolts and No.1 seat leg sub-assembly.
| 40.
REMOVE NO.1 SEAT LEG SUB-ASSEMBLY |
|