REASSEMBLY
Removal / installation · Vehicles built from Jan 2017
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
INSTALL NO.1 SEATBACK PAD SUB-ASSEMBLY |
|
| 2.
INSTALL NO.1 SEATBACK COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No.1 seatback cover sub-assembly to the No.1 seatback pad sub-assembly with 2 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Close the fastener of the No.1 seatback cover sub-assembly.
| 3.
INSTALL ASSIST GRIP ASSEMBLY (w/ Assist Grip) |
|
| 4.
INSTALL ASSIST GRIP PLUG (w/ Assist Grip) |
|
| 5.
INSTALL NO.1 SEAT LEG SUB-ASSEMBLY |
 |
- Install the No.1 seat leg sub-assembly with the 4 bolts.
-
Torque:
- 41 N*m{
418 kgf*cm
, 30 ft.*lbf
}
| 6.
INSTALL NO.1 SEAT CUSHION PAD |
|
| 7.
INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No.1 seat cushion cover sub-assembly to the No.1 seat cushion pad with 6 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Using hog ring pliers, install the 2 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
| 8.
INSTALL NO.1 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
|
| 9.
INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Belt)
|
 |
- Install the seat lap type belt assembly No.1 with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 10.
INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- Install the rear seat belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 11.
INSTALL REAR SEAT LEG SIDE COVER NO.2 (for Second Row) |
|
| 12.
INSTALL REAR SEAT LEG SIDE COVER NO.3 |
|
| 13.
INSTALL RECLINING ADJUSTER COVER RH |
|
| 14.
INSTALL RECLINING ADJUSTER COVER LH |
|