PRECAUTION
Precautions · Vehicles built from Oct 2014
- NOTICE:
- Remove any dirt or mud from piping with water to prevent it from entering the inside of the piping when removing, installing, or disassembling parts.
- Keep removed or disassembled parts in order and prevent any dirt from attaching to them.
- When removing, installing, or replacing piping or a clip, be sure not to allow it to come into contact with other parts.
- Install the piping without twisting or forcibly bending.
- After disconnecting the piping, do not start the engine until bleeding of the power steering system has been completed.
- After connecting the piping, wipe any fluid from each part to check for fluid leaks.
- Use Toyota genuine power steering fluid, ATF DEXRON II or III, or equivalent.
- Remove any dirt or mud from piping with water to prevent it from entering the inside of the piping when removing, installing, or disassembling parts.