INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH |
Remove the power window regulator motor.

Apply battery voltage to the motor connector according to the table below.
- NOTICE:
- Do not apply battery to any terminals except terminals 1 and 2.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 1 (D)
Battery negative (-) → Terminal 2 (U)
Motor gear rotates clockwise
Battery positive (+) → Terminal 2 (U)
Battery negative (-) → Terminal 1 (D)
Motor gear rotates counterclockwise
| INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH |
Remove the power window regulator motor.

Apply battery voltage to the motor connector according to the table below.
- NOTICE:
- Do not apply battery to any terminals except terminals 1 and 2.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 1 (D)
Battery negative (-) → Terminal 2 (U)
Motor gear rotates counterclockwise
Battery positive (+) → Terminal 2 (U)
Battery negative (-) → Terminal 1 (D)
Motor gear rotates clockwise
