2014-2019 Hiace · Service Manual BRAKE

FAIL-SAFE CHART

System information · Vehicles built Jan 2015 – Dec 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017


FAIL SAFE OPERATION
  1. If there is a problem with sensor signals or actuator systems, the skid control ECU prohibits power supply to the brake actuator and ABS control.

  2. If the ABS components malfunction before starting control, the vehicle immediately stops the ABS operation.
    If any of the system components malfunction during control, the vehicle gradually stops ABS control so as not to trigger a sudden change in vehicle condition.
    If it is impossible to control the systems, the ABS warning light comes on to inform the driver of the termination of the systems (Click here).

    HINT:
    If the ABS malfunctions, the brake system will operate normally without ABS control.

← FAIL-SAFE CHART (Oct 2014 – Dec 2014)FAIL-SAFE CHART (from Jan 2017) →