2014-2019 Hiace · Service Manual RESTRAINTS

DATA LIST / ACTIVE TEST

System information · Vehicles built from Oct 2014

HINT:
By accessing the DATA LIST displayed on the intelligent tester, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the DATA LIST is the first step of troubleshooting and is one method to shorten labor time.


DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY

  1. A105097E01
    Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Following the display on the tester screen, read the "DATA LIST".

    Item
    Measure Item/
    Range (Display)
    Normal Condition
    Diagnostic Note
    Disp Typ
    Display Type Information/
    LR: The display is indicated by LH/RH
    DP: The display is indicated by Driver/Passenger
    LR
    -
    #Past Codes
    Number of past DTC/
    Min.: 0, Max.: 255
    0
    -

← CHECK MODE PROCEDURE (from Oct 2014)DIAGNOSTIC TROUBLE CODE CHART (Oct 2014 – Dec 2014) →