2014-2019 Hiace · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT INNER REAR VIEW MIRROR ASSEMBLY

B316056E01
Text in Illustration 
*1
Black Colored Tape
-
-
*a
Component without harness connected
(Inner Rear View Mirror Assembly)
*b
Bright
*c
Dark
-
-
  1. Check operation of the electrochromic inner mirror.

    1. Connect the battery positive (+) lead to terminal 6 (IG) and the negative (-) lead to terminal 3 (E).

    2. Attach black colored tape to the forward sensor to prevent it from sensing.

    3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

      HINT:
      When the environment is very bright, the anti-glare operation may occur immediately after the tape is applied.

      1. If the result is not as specified, replace the inner rear view mirror assembly.

← REMOVAL (from Dec 2017)INSTALLATION (Oct 2014 – Nov 2017) →