2014-2019 Hiace · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Dec 2016 from Jan 2017


COMBINATION METER ASSEMBLY
E293050E01
Text in Illustration 
*A
for Segment Display Type
*B
for Dot Display Type
*1
Speedometer
*2
Tachometer (w/ Tachometer)
*3
Engine Coolant Temperature Receiver Gauge
*4
Fuel Receiver Gauge
*5
  1. ODO/TRIP
  2. Outside Temperature
  3. Clock
*6
Multi-information Display
*7
  1. Shift Position Indicator (for Automatic Transmission)
  2. Clock
-
-

METER GAUGE AND WARNING/INDICATOR
Meter/Gauge 
Item
Detail
Speedometer
  1. Based on a signal received from the wheel speed sensors, the brake actuator assembly calculates the vehicle speed and transmits data to the combination meter assembly (Direct line)*1.
  2. Speedometer sensor calculates the vehicle speed and transmits data to the combination meter assembly (Direct line)*2.
Tachometer*3
The combination meter assembly receives an engine speed signal from the ECM and the gauge needle operates (Direct line).
Engine coolant temperature receiver gauge
Receives engine coolant temperature signals from the ECM and the gauge needle operates (Direct line).
Fuel receiver gauge
The combination meter assembly receives fuel amount information measured by the fuel sender gauge and the gauge needle operates (Direct line).
  1. *1: w/o Speedometer Sensor
  2. *2: w/ Speedometer Sensor
  3. *3: w/ Tachometer
Warning or Indicator 
Item
Detail
BEAM indicator light
Receives high beam indicator light signals from the headlight dimmer switch assembly (Direct line).
Fr FOG indicator light*1
Receives front fog indicator light signals from the headlight dimmer switch assembly (Direct line).
Rr FOG indicator light*2
Receives rear fog indicator light signals from the headlight dimmer switch assembly (Direct line).
AIRBAG warning light*3
Receives malfunction signals from the center airbag sensor assembly (Direct line).
Front seat belt warning light
Receives driver seat belt signals (unfastened) from the front seat inner belt assembly (Direct line).
BRAKE warning light
  1. Comes on when the parking brake switch is on (Direct line).
  2. Comes on when the brake fluid level warning switch is on (Direct line).
  3. Comes on when the vacuum warning switch is on (Direct line).*4
CHARGE warning light
Receives malfunction signals from the generator assembly (Direct line).
ABS warning light*5
Receives malfunction signals from the brake actuator assembly (Direct line).
CHECK E/G
Receives malfunction signals from the ECM (Direct line).
DOOR warning light
Receives door open signals from the door courtesy light switch assembly (Direct line).
TAIL indicator light
The indicator turns on when a taillight illumination signal is received (Direct line).
OIL warning light*6
Receives engine oil pressure warning signals from the engine oil pressure switch assembly (Direct line).
FUEL warning light
Receives fuel level warning signals from the fuel sender gauge indicating low or no fuel (Direct line).
Turn indicator light
Receives turn signals from the turn signal switch assembly (Direct line).
GLOW indicator light*4
Receives a GLOW indicator light signal from the ECM (CAN).
OIL LEVEL indicator light
Receives turn signals from the engine oil level sensor (Direct line).
T-BELT warning light*3
Illuminates when odometer's display is 150000 km (90000 mile).
Master warning light*8
Receives warning signals from sensors and ECUs (Direct line and CAN).
Cruise control indicator light*9
Receives cruise control indicator light signals from the ECM (CAN).
SET indicator light*9
Receives SET indicator light signals from the ECM (CAN).
SEDIMENT/FILTER warning light*4
Receives the sedimenter signal from the fuel sedimenter switch or level warning switch (Direct Line)
DPF indicator light*10
Receives a DPF indicator light signal from the ECM (CAN).
Brake override system warning light
Receives a brake override system warning light signal from the ECM (Direct Line).
LED headlight warning light*11, *12
Receives a LED headlight warning light signal from the headlight swivel ECU assembly (CAN).
Security indicator light
  1. Receives a security indicator light signal from the certification ECU (smart key ECU assembly) (Direct Line).*13
  2. Receives a security indicator light signal from the transponder key ECU (Direct Line).*14, *15
Speed warning light*7
Receives a speed warning light signal from the speed sensor (Direct Line).
Eco Driving Indicator Light*16
Receives an ecology lamp indicator signal from the ECM (CAN).
Headlight beam level control system indicator light*11, *12
Receives a headlight beam level control system indicator light signal from the headlight swivel ECU assembly (CAN).
Smart entry indicator light*12, *13
Receives a smart entry indicator light signal from the certification ECU (smart key ECU assembly) (CAN).
  1. *1: w/ Front Fog Light
  2. *2: w/ Rear Fog Light
  3. *3: w/ Airbag System
  4. *4: Engine Type Diesel
  5. *5: w/ ABS
  6. *6: except 1KD-FTV (w/ DPF)
  7. *7: for Middle East
  8. *8: for Dot Display Type
  9. *9: w/ Cruise Control System
  10. *10: for 1KD-FTV (w/ DPF)
  11. *11: for LED Headlight
  12. *12: for Segment Display Type
  13. *13: w/ Smart Entry and Start System
  14. *14: w/o Smart Entry and Start System
  15. *15: w/ Engine Immobiliser System
  16. *16: for Automatic Transmission
← SYSTEM DIAGRAM (from Jan 2017)SYSTEM DESCRIPTION (Jan 2015 – Dec 2016) →