2014-2019 Hiace · Service Manual COMMUNICATION SYSTEM

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Oct 2014


LIN COMMUNICATION SYSTEM DESCRIPTION
The LIN communication system is used for communication between the components in the tables below. If communication cannot be performed through LIN communication because of a break in the communication lines or some other reason, the master control ECU of the relevant system stores DTCs. Refer to the table below about the communication bus lines and connected components.

HINT:
  1. Each component has a fail-safe function which activates to maintain the minimum performance of the system and protect the system.
  2. In the following table, "○" indicates that the function applies, and "-" indicates that it does not.

Certification Bus Lines 
Component
Master Control
LIN Communication DTC Output Function
Certification ECU (smart key ECU assembly)
○
○
Steering lock actuator assembly
-
-
ID code box (immobiliser code ECU)
-
-
← SYSTEM DIAGRAM (from Oct 2014)HOW TO PROCEED WITH TROUBLESHOOTING (Oct 2014 – Dec 2014) →