2014-2019 Hiace · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. REMOVE 2ND COAST BRAKE PISTON OIL SEAL RING

  1. AT05418
    Remove the oil seal ring from the piston.


2. REMOVE 2ND COAST BRAKE PISTON ROD

  1. AT05260
    Firmly hold down the piston, then compress the compression spring.

  1. Using needle nose-pliers, remove the E-ring.

  1. AT05206E01
    Remove the compression spring, the retainer and the piston rod.


3. INSPECT 2ND COAST BRAKE BAND ASSEMBLY

  1. AT05205E01
    If the lining of the brake band is peeled off or discolored, or even only a part of the printed numbers is corroded, replace the brake band.

← COMPONENTS (from Oct 2014)INSPECTION (from Oct 2014) →