REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
INSTALL 2ND COAST BRAKE PISTON |
 |
- There are 2 different lengths for the piston rod.
Piston rod length:
Number of grooves
|
Thickness mm (in.)
|
0
|
78.40 (3.087)
|
1
|
79.90 (3.146)
|
When the piston rod stroke is outside the standard value even if the brake band works normally, replace the rod with a new one.
- Install the retainer, the spring and the piston to the piston rod.
- Firmly hold down the piston, then compress the compression spring.
Using needle-nose pliers, install the E-ring.
| 2.
INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING |
 |
- Coat the oil seal ring with ATF.
Squeeze the ends of the oil seal ring together with the wrap distance 8 mm (0.31 in.) or less, and then install them to the starter shaft groove.
- NOTICE:
- Do not over-spread the ring ends.