2014-2019 Hiace · Service Manual BRAKE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Oct 2014


CHECK VACUUM PUMP

  1. C111341E01
    Slide the clip and disconnect the vacuum hose from the vacuum pump union.

  1. Connect the hose of a vacuum gauge to the vacuum pump union.

  1. Insert a plug into the other hose of the vacuum gauge.

  1. Start the engine and warm it up for more than 2 minutes.

  1. With the engine idling, check the negative pressure of the vacuum pump.

    Standard negative pressure:
    More than 86.7 kPa (650 mmHg, 25.59 in.Hg)

    HINT:
    It is necessary to replace the vacuum pump blades every 200000 km (124000 miles).

  1. Remove the vacuum gauge from the vacuum pump union.

  1. Connect the vacuum hose to the vacuum pump union with the clip.

← COMPONENTS (from Oct 2014)REMOVAL (from Oct 2014) →