2014-2019 Hiace · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Oct 2014

NOTICE:
Take extra care when handling these precision electronic components.


1. REMOVE TRANSMITTER HOUSING COVER

  1. B318043E01
    Twist a screwdriver in the direction of the arrow in the illustration, and open the transmitter housing cover.
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    Do not forcibly pry open the cover.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET

  1. B318044
    Remove the door control transmitter module set.

    NOTICE:
    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.


3. REMOVE TRANSMITTER BATTERY

  1. B318045
    Twist a coin in the direction of the arrow in the illustration and detach the 7 claws to remove the transmitter battery cover.

    NOTICE:
    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  1. B318046
    Remove the transmitter battery (lithium battery: CR2016).

    NOTICE:
    1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
    2. Do not push the terminals with your finger.
    3. Do not forcibly pry up the battery. The terminals may become damaged.
    4. Do not touch the battery with wet hands. Water may cause rust.
    5. Do not touch or move any components inside the transmitter. It may cease to work.

← COMPONENTS (from Oct 2014)INSPECTION (from Oct 2014) →